« previous next »
Pages: [1]   Go Down

Author Topic: Carving  (Read 2615 times)

Offline Jim Kibler

  • Hero Member
  • *****
  • Posts: 4377
    • Personal Website
Carving
« on: August 27, 2023, 01:20:53 AM »
Some additional shots of carving I’ve been working on.  Started out as cnc incised carving.









Logged

Offline JTR

  • member 2
  • Hero Member
  • ****
  • Posts: 4291
Re: Carving
« Reply #1 on: August 27, 2023, 01:23:41 AM »
You're making this look too easy!  ;D
John
Logged
John Robbins

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13372
    • Mike Brooks Gunmaker
Re: Carving
« Reply #2 on: August 27, 2023, 01:26:20 AM »
Nifty
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline TDM

  • Hero Member
  • *****
  • Posts: 603
Re: Carving
« Reply #3 on: August 27, 2023, 01:36:26 AM »
Looks great Jim.
Logged

Offline waarp8nt

  • Starting Member
  • *
  • Posts: 16
Re: Carving
« Reply #4 on: August 27, 2023, 02:29:41 AM »
Looks like the cnc and your hand carving complement each other really well. Good Job!
Logged

Offline Crow Choker

  • Jr. Member
  • **
  • Posts: 54
Re: Carving
« Reply #5 on: August 27, 2023, 06:30:26 AM »
Looks very nice.
Logged

Offline flatsguide

  • Hero Member
  • *****
  • Posts: 778
Re: Carving
« Reply #6 on: August 27, 2023, 09:23:22 AM »
That’s a nice chance to let a builder to start or improve their carving skills.
Cheers Richard
Logged

Offline BOB HILL

  • Hero Member
  • *****
  • Posts: 2252
Re: Carving
« Reply #7 on: August 27, 2023, 02:50:09 PM »
Very nice, Jim.
 Bob
Logged
South Carolina Lowcountry

Offline Bob Gerard

  • Hero Member
  • *****
  • Posts: 1231
    • Powder Horns and Such
Re: Carving
« Reply #8 on: August 27, 2023, 03:59:42 PM »
Tres élégante !
Logged

Offline J.M.Browning

  • Full Member
  • ***
  • Posts: 178
Re: Carving
« Reply #9 on: August 27, 2023, 04:15:30 PM »
Really nice work !
Logged
Thank you Boone , Glass with all the contemplate I read with todays (shooter's lightly taken as such) , you keep things simple .

Offline Gemmer

  • Jr. Member
  • **
  • Posts: 51
Re: Carving
« Reply #10 on: August 27, 2023, 06:51:55 PM »
Quote from: flatsguide on August 27, 2023, 09:23:22 AM
That’s a nice chance to let a builder to start or improve their carving skills.
Cheers Richard

This is an excellent suggestion!
Logged

Offline Hunterdude

  • Full Member
  • ***
  • Posts: 222
Re: Carving
« Reply #11 on: August 29, 2023, 04:18:18 AM »
I love how the cnc incised carving is pretty much the most perfectly "drawn" pattern, (i can not draw to save my life) but it is more than "drawn"...it has a "depth" that is precision.... a beginner that is scared to mess up can finish "as is".
   But the slightly mid level kit builder can add relief and make it come to life as much as desired.
Excellent!....i personally may have NEVER attempted to "carve" a rifle or Fowler, now i am tempted more than i ever thought possible, thank you Mr. Kibler
« Last Edit: August 29, 2023, 04:28:05 AM by Hunterdude »
Logged

Offline Scota4570

  • Hero Member
  • *****
  • Posts: 2318
Re: Carving
« Reply #12 on: August 29, 2023, 08:03:44 PM »
That is stunning.  It is very elegant and complicated.

When I first saw the machine incised carving I was thinking about adding relief.  I wonder if a simplified incised pattern could be supplied?  Maybe to be used as a paint by numbers equivalent  carving kit?   Or maybe  a dedicated practice kit with the lay out done.  It would be a confidence builder for many. 
Logged

Offline TDM

  • Hero Member
  • *****
  • Posts: 603
Re: Carving
« Reply #13 on: August 30, 2023, 11:02:11 PM »
Quote from: Scota4570 on August 29, 2023, 08:03:44 PM
That is stunning.  It is very elegant and complicated.

When I first saw the machine incised carving I was thinking about adding relief.  I wonder if a simplified incised pattern could be supplied?  Maybe to be used as a paint by numbers equivalent  carving kit?   Or maybe  a dedicated practice kit with the lay out done.  It would be a confidence builder for many.

Agree with Scota4570.
Logged

Offline Jim Kibler

  • Hero Member
  • *****
  • Posts: 4377
    • Personal Website
Re: Carving
« Reply #14 on: August 31, 2023, 11:16:29 PM »
I'll be doing a fairly conservative relief carved version in time.  It will nothing like this carving.  I could do a simple incised version as well.  We'll see...  Problem with doing this with the intention of the customer relieving it is that the vast majority don't have the skills for such work.

Jim
Logged

Offline dadybear1

  • Full Member
  • ***
  • Posts: 142
Re: Carving
« Reply #15 on: September 23, 2023, 10:39:38 PM »
JIM YOU ARE TRULY A MASTER (IN OLD SCHOOL WAY) AND A GENIUS IN THE NEW(CNC -COMPUTER) WAY----THANKS FOR ALL YOU DO--WE APPRECIATE IT...
Logged

Offline 2 shots

  • Full Member
  • ***
  • Posts: 183
Re: Carving
« Reply #16 on: September 24, 2023, 04:05:09 AM »
 sir, your talent seems to have no limits.. p.s. wheres the fowling piece ;)
Logged

Offline Karl Kunkel

  • Hero Member
  • *****
  • Posts: 970
Re: Carving
« Reply #17 on: September 24, 2023, 04:16:46 AM »
Looking forward to the conservative relief carving.
Logged
Kunk
Pages: [1]   Go Up
« previous next »