Author Topic: jewelers saw?  (Read 1048 times)

Offline ScottH

  • Hero Member
  • *****
  • Posts: 575
jewelers saw?
« on: November 16, 2023, 03:11:42 AM »
I have my Kibler SMR all assembled, pins sticking out everywhere.
Now I think I need to slot the barrel lugs?
What is a good source for a Jewelers saw?

Thanks!  :)

Offline mountainman

  • Sr. Member
  • ****
  • Posts: 472
Re: jewelers saw?
« Reply #1 on: November 16, 2023, 03:37:22 AM »
Log Cabin Shop at Lodi, Oh

Offline wibper

  • Starting Member
  • *
  • Posts: 26
Re: jewelers saw?
« Reply #2 on: November 16, 2023, 04:52:35 PM »
I bought mine at my local Woodcraft.  The salesperson knew what I wanted when I asked for it, though it's labelled as something else where it's hanging on a peg in the saws aisle.

Offline bluenoser

  • Hero Member
  • *****
  • Posts: 861
Re: jewelers saw?
« Reply #3 on: November 16, 2023, 04:57:43 PM »
Worn our hacksaw blades are generally still sharp for an inch or two at each end.  Grind the back off the end of an old fine-tooth blade until it will fit the hole and wrap some tape around the blade for a handle.  I prefer them to cut on the pull stroke.

Offline P.W.Berkuta

  • Hero Member
  • *****
  • Posts: 2221
Re: jewelers saw?
« Reply #4 on: November 17, 2023, 06:55:19 PM »
I use Rio Grande for stuff like this. <https://www.riogrande.com/>. I use the German style frame and find it to works well for me plus the price is right. Stay away from the Economy Adjustable 2-3/4"Saw Frame ::). <https://www.riogrande.com/product/tools--equipment/saw-blades--frames/saw-frame/>
"The person who says it cannot be done should not interrupt the person who is doing it." - Chinese proverb

Offline NRFord

  • Starting Member
  • *
  • Posts: 7
Re: jewelers saw?
« Reply #5 on: November 19, 2023, 01:52:12 AM »
Used a round, needle point file. I didn't enlarge hole just lengthened it parallel with barrel. Unless you want more tools...