Author Topic: Metal finishing questions...  (Read 1977 times)

Offline Martin S.

  • Hero Member
  • *****
  • Posts: 547
Metal finishing questions...
« on: November 28, 2023, 05:50:39 PM »
I am polishing brass for a Kibler Woodsrunner.  I have polished to 600 grit, do I need to go further?  800 grit?

Also, do you prefer Jax Brown, Jax Black, or Birchwood Casey Brass Black?

I'll be doing the barrel later, with blueing rubbed back to a "French grey" look.  I can't remember what we used for degreaser.  Can I just use dishwashing soap?  Or do I need something more specific?

Thanks for your thoughts!

Martin


Offline Matt48

  • Starting Member
  • *
  • Posts: 19
Re: Metal finishing questions...
« Reply #1 on: November 28, 2023, 07:04:19 PM »
Do you polish the brass on the gun? Or separately?

Offline Martin S.

  • Hero Member
  • *****
  • Posts: 547
Re: Metal finishing questions...
« Reply #2 on: November 28, 2023, 08:34:21 PM »
Do you polish the brass on the gun? Or separately?

I did mine separately.

Offline P.W.Berkuta

  • Hero Member
  • *****
  • Posts: 2212
Re: Metal finishing questions...
« Reply #3 on: November 28, 2023, 08:37:44 PM »
It depends on how shinny you like it. I do 320 to 400 grit then 4/0 steel wool on most of my brass.
"The person who says it cannot be done should not interrupt the person who is doing it." - Chinese proverb

Offline Beaverman

  • Hero Member
  • *****
  • Posts: 569
Re: Metal finishing questions...
« Reply #4 on: November 28, 2023, 08:50:10 PM »
Have you not watched the Kibler videos on you tube on the Woodsrunner build, might want to give them a peek , covers how Jim finishes his brass.

Offline TDM

  • Hero Member
  • *****
  • Posts: 603
Re: Metal finishing questions...
« Reply #5 on: November 28, 2023, 09:17:44 PM »
Denatured alcohol is a great degreaser, it’s what I use. I generally take the brass to a full polish with a buffing wheel before the coloring with Jax Brown. Agree with Beaverman on watching the Kibler videos.

Offline Kevin Houlihan

  • Sr. Member
  • ****
  • Posts: 307
Re: Metal finishing questions...
« Reply #6 on: November 29, 2023, 01:30:36 AM »
 For brass, I sand to 400, then maroon and then grey Scotch-Brite.  The Scotch-Brite helps blend the scratches.  I don't ever polish brass on a buffing wheel as it can remove any crisp lines and tends to cup screw holes.  Also, if you're going to use a Jax finish on the brass, finishing beyond 400 is pointless.  I had good results with the Jax Brown on brass and Jax Black on steele.
Good luck,
Kevin

Offline Matt48

  • Starting Member
  • *
  • Posts: 19
Re: Metal finishing questions...
« Reply #7 on: November 29, 2023, 10:21:46 AM »
Have you not watched the Kibler videos on you tube on the Woodsrunner build, might want to give them a peek , covers how Jim finishes his brass.

Is there one where Jim shows how to finish the brass parts? I could not find it... Could you post a link please?

Offline Don

  • Starting Member
  • *
  • Posts: 11
Re: Metal finishing questions...
« Reply #8 on: November 29, 2023, 04:39:15 PM »
It's in the Colonial series.  Used this and a couple of mentors from this great forum on mine.

Offline Matt48

  • Starting Member
  • *
  • Posts: 19
Re: Metal finishing questions...
« Reply #9 on: November 29, 2023, 06:34:54 PM »
It's in the Colonial series.  Used this and a couple of mentors from this great forum on mine.


Thank you!

Offline wibper

  • Starting Member
  • *
  • Posts: 26
Re: Metal finishing questions...
« Reply #10 on: November 29, 2023, 08:12:37 PM »
You want bright, shiny "like new" polished brass? Then use a cream polish like Mother's and buff it.  (Don't use Brasso - it's no good)  Or, you want a patina look?  Then your 600 grit has gone plenty far enough already.  I've used JAX Brown solution on a pistol build and it produces a very nice patina, and it's fast and easy to use.  I've also used the B-C solution on an earlier build, and I think JAX is far superior.

Online Daryl

  • Hero Member
  • *****
  • Posts: 15768
Re: Metal finishing questions...
« Reply #11 on: November 29, 2023, 08:50:37 PM »
You want bright, shiny "like new" polished brass? Then use a cream polish like Mother's and buff it.  (Don't use Brasso - it's no good)  Or, you want a patina look?  Then your 600 grit has gone plenty far enough already.  I've used JAX Brown solution on a pistol build and it produces a very nice patina, and it's fast and easy to use.  I've also used the B-C solution on an earlier build, and I think JAX is far superior.

When I was in basic training and injured, couldn't march with the troop, I spent that period, polishing the galvanized garbage can in the drill hall, with Brasso. By Graduation (yeah -badly injured)
that garbage can looked like it was chrome polished. The "brass" liked it so much, they had it chrome plated in Regina, because it would tarnish in 2 or 3 days. I had to buy the brasso myself.
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline Clark Badgett

  • Hero Member
  • *****
  • Posts: 2257
  • Oklahoma
Re: Metal finishing questions...
« Reply #12 on: November 30, 2023, 04:09:13 AM »
Brasso certainly does work. I might still have the remnant of my last can from my active military days.
Psalms 144

Offline Tumbledown

  • Starting Member
  • *
  • Posts: 29
Re: Metal finishing questions...
« Reply #13 on: November 30, 2023, 05:39:14 AM »
I do brass down to 800 grit, then 0000 steel wool. For a simple polish, mix vinegar and flour into a paste and use it likecany commercial polish.

Offline Dphariss

  • Hero Member
  • *****
  • Posts: 9919
  • Kill a Commie for your Mommy
Re: Metal finishing questions...
« Reply #14 on: December 01, 2023, 04:47:02 PM »
I am polishing brass for a Kibler Woodsrunner.  I have polished to 600 grit, do I need to go further?  800 grit?

Also, do you prefer Jax Brown, Jax Black, or Birchwood Casey Brass Black?

I'll be doing the barrel later, with blueing rubbed back to a "French grey" look.  I can't remember what we used for degreaser.  Can I just use dishwashing soap?  Or do I need something more specific?

Thanks for your thoughts!

Martin



Just use it. Do you think JP Beck or Dickert put brass black on the guns they made?  Any polish of 400 or better is fine. The antiquing craze is for people who like to pretend.
He who dares not offend cannot be honest. Thomas Paine

Offline JTR

  • member 2
  • Hero Member
  • ****
  • Posts: 4343
Re: Metal finishing questions...
« Reply #15 on: December 01, 2023, 07:32:13 PM »
The antiquing craze is for people who like to pretend.

Well I don't know about that. Seems to me that the finish on a modern gun is like paint on a car; Some like red, some like Blue or black.
In the end, who cares. It's your car, or gun, so do what you like.

John
John Robbins

Offline Blacksmoke

  • Hero Member
  • *****
  • Posts: 859
  • "Old age and treachery beats youth and skill"
Re: Metal finishing questions...
« Reply #16 on: December 01, 2023, 08:12:29 PM »
Mother Nature will always do a better job of "antiquing" than any of us can!  As Dan says " just use it'!  The antique look will appear with out any assistance.  Hugh Toenjes
H.T.

Offline wibper

  • Starting Member
  • *
  • Posts: 26
Re: Metal finishing questions...
« Reply #17 on: December 01, 2023, 08:36:32 PM »
.... The antique look will appear with out any assistance. ....
Except maybe those of us humans that are already ourselves antiqued by Mother Nature can't wait for Her to naturally antique our faux-antique guns.   ;D

Online Daryl

  • Hero Member
  • *****
  • Posts: 15768
Re: Metal finishing questions...
« Reply #18 on: December 01, 2023, 08:38:52 PM »
Hasn't taken very long for this one. I kinda like it. Interesting. Still having trouble with pictures showing.




Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline reddogge

  • Jr. Member
  • **
  • Posts: 50
Re: Metal finishing questions...
« Reply #19 on: December 02, 2023, 03:22:22 AM »
When I built a gun for my 11-year-old son, the only gun brass mounted I've ever made, Jax didn't exist. I just admonished him to NEVER polish the brass. The gun antiqued itself. This would be 43 years of patina. Granted he hadn't shot this rifle in decades so most of the aging was done is 4 years.



« Last Edit: December 02, 2023, 10:10:44 PM by reddogge »

Offline Dphariss

  • Hero Member
  • *****
  • Posts: 9919
  • Kill a Commie for your Mommy
Re: Metal finishing questions...
« Reply #20 on: December 02, 2023, 07:29:11 AM »
The antiquing craze is for people who like to pretend.

Well I don't know about that. Seems to me that the finish on a modern gun is like paint on a car; Some like red, some like Blue or black.
In the end, who cares. It's your car, or gun, so do what you like.

John
I agree but I have seen some pretty silly paint jobs too.  An reenactor that makes the gun look like its 100 or more years old is pretty silly don’t you think? To make a rifle
look like an original that has 50-100 years of use is pretty silly when reenacting the period when the rifle would have been at most a few years old.  And rifles were expensive they were not abused except by accident.
He who dares not offend cannot be honest. Thomas Paine