Author Topic: SMR Halfstock  (Read 1321 times)

Offline Roger B

  • Hero Member
  • *****
  • Posts: 1644
  • You wouldn't have a snack, would you?
SMR Halfstock
« on: January 10, 2024, 08:21:35 PM »
Howdy!
I've been going through my old parts
& came up with everything I need to build a southern style, curly ash halfstock. I'm going to use Dillion furniture & a Moody 7/8" 42" barrel. I have enough ash left over from another build to make a wooden under rib for the 42" barrel.

My question is;  will a barrel that long be style correct or just look too stupid? I hate to cut the barrel off significantly, but will do it if I need to. The full length barrel is going to make the rifle look really long! Forgot to mention that it will be flint (well tuned Durs Egg).

So what do you guys & girls think? Should I forget ahead, cut the barrel off, or consider a totally different style? If a different style, what should I go to?
Many thanks,
Roger B
Never underestimate the sheer destructive power of a minimally skilled, but highly motivated man with tools.

Offline Stoner creek

  • Hero Member
  • *****
  • Posts: 2911
Re: SMR Halfstock
« Reply #1 on: January 10, 2024, 08:38:19 PM »
There were some what’s referred to as 3/4 stock rifles made in the 19th century so what you’re planning is certainly plausible!
Stop Marxism in America

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15822
Re: SMR Halfstock
« Reply #2 on: January 10, 2024, 09:26:09 PM »
3/4 length, sounds like a GREAT idea. ;D
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline T.C.Albert

  • Global Moderator
  • Hero Member
  • *
  • Posts: 3582
    • the hunting pouch
Re: SMR Halfstock
« Reply #3 on: January 10, 2024, 09:26:36 PM »
I wouldn’t cut it. In fact longer can be better on these in my opinion.
You say southern mountain rifle, so even though it’s not a flint lock I post this well known image as an example.
Tim A


"...where would you look up another word for thesaurus..."
Contact at : huntingpouch@gmail.com

Offline Roger B

  • Hero Member
  • *****
  • Posts: 1644
  • You wouldn't have a snack, would you?
Re: SMR Halfstock
« Reply #4 on: January 10, 2024, 11:23:17 PM »
Thanks, all!  As it is, my stock is going to be less than a 3/4, but it is really curly! 
Roger B.
Never underestimate the sheer destructive power of a minimally skilled, but highly motivated man with tools.

Offline okawbow

  • Hero Member
  • *****
  • Posts: 911
  • West Tennessee/ Southern Illinois
Re: SMR Halfstock
« Reply #5 on: January 11, 2024, 01:28:57 AM »


Not an SMR, but 42” x 7/8” barrel.
As in life; it’s the journey, not the destination. How you get there matters most.

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15822
Re: SMR Halfstock
« Reply #6 on: January 11, 2024, 02:33:55 AM »
Here's one Taylor shortened for me. 42" x 7/8" bl.




Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline JTR

  • member 2
  • Hero Member
  • ****
  • Posts: 4351
Re: SMR Halfstock
« Reply #7 on: January 11, 2024, 02:48:07 AM »
Roger, I just posted some pictures of a Henry Wright Half stock, with a 42 1/2" long barrel.
Click on this link and it should take you there. https://americanlongrifles.org/forum/index.php?topic=79774.0

John
John Robbins

Offline Roger B

  • Hero Member
  • *****
  • Posts: 1644
  • You wouldn't have a snack, would you?
Re: SMR Halfstock
« Reply #8 on: January 11, 2024, 03:18:39 AM »
Thanks! I really like the rifle!
Roger B.
Never underestimate the sheer destructive power of a minimally skilled, but highly motivated man with tools.

Offline Longknife

  • Hero Member
  • *****
  • Posts: 2094
Re: SMR Halfstock
« Reply #9 on: January 11, 2024, 05:12:51 PM »
I have an original half stock percussion rifle with a 42-inch barrel, upon disassembly I discovered the barrel had been shortened about 2 inches.
Ed Hamberg

Offline Cades Cove Fiddler

  • Hero Member
  • *****
  • Posts: 1717
Re: SMR Halfstock
« Reply #10 on: January 14, 2024, 01:24:48 AM »
 ;) ;)... I had an original Greene Co. Tennessee rifle half-stock striped maple, with a 47" barrel with hickory wood under-rib... it might have been a broken full-stock that was shortened to half-stock... CCF


ebay html