« previous next »
Pages: [1]   Go Down

Author Topic: Iron nitrate stain on plain maple  (Read 1008 times)

Offline doulos

  • Full Member
  • ***
  • Posts: 161
Iron nitrate stain on plain maple
« on: February 17, 2024, 08:21:04 AM »
Is it worth using iron nitrate stain such as sold b Jim Kibler on a piece of maple with not very much curl. I’m not a builder so I am curious to hear from a builders mind on this.
Logged

Offline P.W.Berkuta

  • Hero Member
  • *****
  • Posts: 2213
Re: Iron nitrate stain on plain maple
« Reply #1 on: February 17, 2024, 09:35:39 AM »
For me - I say yes because it produces a nice reddish-brown color that I like on most of the maple that I used it on- your milage may vary. Be aware that not all maple will stain this color.
Logged
"The person who says it cannot be done should not interrupt the person who is doing it." - Chinese proverb

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Iron nitrate stain on plain maple
« Reply #2 on: February 17, 2024, 12:21:14 PM »
Yes.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline bluenoser

  • Hero Member
  • *****
  • Posts: 834
Re: Iron nitrate stain on plain maple
« Reply #3 on: February 17, 2024, 01:53:32 PM »
Yes.  My last build, which was just finished, is plain rock maple.  The ferric nitrate stain turned it a nice light brown.  It could have been made darker by applying tannic acid before the ferric nitrate.
Logged

Offline TDM

  • Hero Member
  • *****
  • Posts: 603
Re: Iron nitrate stain on plain maple
« Reply #4 on: February 17, 2024, 05:06:29 PM »
That’s an easy Yes.
Logged

Offline Bill Raby

  • Hero Member
  • *****
  • Posts: 1543
Re: Iron nitrate stain on plain maple
« Reply #5 on: February 17, 2024, 05:12:09 PM »
What I have found is that it will bring out more curl than you realize was there. What looks like a plain piece of wood often is not quite so plain after all.
Logged

Online B.Habermehl

  • Hero Member
  • *****
  • Posts: 1688
Re: Iron nitrate stain on plain maple
« Reply #6 on: February 17, 2024, 06:23:15 PM »
Quote from: Bill Raby on February 17, 2024, 05:12:09 PM
What I have found is that it will bring out more curl than you realize was there. What looks like a plain piece of wood often is not quite so plain after all.

Agreed. Maple can be surprisingly interesting when stained. Even so called plain wood. I bought the plainest piece of maple available for a trade gun stock as I couldn’t source proper wood. And got surprised. BJH
Logged
BJH
Pages: [1]   Go Up
« previous next »