Author Topic: Sketching for a Woodsrunner build  (Read 6109 times)

Offline flatsguide

  • Hero Member
  • *****
  • Posts: 852
Re: Sketching for a Woodsrunner build
« Reply #50 on: November 13, 2024, 07:14:38 AM »
Mike’s, I’m interested in the answer to your question too. I have a choice Maple plank that is about 45 years old along with a light .50 cal 42” Getz bbl. about the same age. But I’m a short guy 5’7” and was wondering if that bbl might be too long for my stature loading wise.???
Cheers Richard

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15813
Re: Sketching for a Woodsrunner build
« Reply #51 on: November 14, 2024, 05:02:03 AM »
I am (or was) 4" taller than you, but managed to load a 48"(6" longer than 42") barreled rifle just fine. Simply put the butt on the ground behind you. I had to.
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline flatsguide

  • Hero Member
  • *****
  • Posts: 852
Re: Sketching for a Woodsrunner build
« Reply #52 on: November 14, 2024, 06:01:19 AM »
Thank Daryl!
Cheers Richard

Offline Mick C

  • Sr. Member
  • ****
  • Posts: 421
Re: Sketching for a Woodsrunner build
« Reply #53 on: November 14, 2024, 07:56:33 PM »
Agreed. I dont think you are ever too short to load a long barrel the way Daryl discribed. That's how I Have I have to load the 46" barreled guns I have.
My profile picture is my beloved K9 best friend and soulmate, Buster Brown, who passed away in 2018.  I miss you buddy!

Offline Seth Isaacson

  • Library_mod
  • Hero Member
  • *
  • Posts: 1103
  • Send me your rifles for the ALR Library!
    • Black Powder Historian
Re: Sketching for a Woodsrunner build
« Reply #54 on: November 14, 2024, 11:21:29 PM »
I have a question for you'all that have, or have built, one of these rfiles....What do you think about the length of the barrel, 39" I beleive? does it look right for the gun?

I have been thinking of trying my hand at one of these kits for while but I generally go for a longer barrel, 42" or more.  I do have an early Lancatser that has a 38" barrel. It's a nice rifle but to my eye, it has always looked a little short to me. 

Thanks for any thoughts or input y'all have....Mick

I don't own either, but a friend of mine had the early Kibler colonial, sold it, and built a woodsrunner, both in .50 caliber. I liked the balance and the way the woodsrunner "points" a lot better personally when I was shooting his rifle.
I am the Lead Historian/Firearms Specialist at Rock Island Auction Co., but I am here out of my own personal interests in muzzle loading and history.
*All opinions expressed are mine alone and are NOT meant to represent those of any other entity unless otherwise expressly stated.*

Offline Mick C

  • Sr. Member
  • ****
  • Posts: 421
Re: Sketching for a Woodsrunner build
« Reply #55 on: November 15, 2024, 08:01:18 PM »
I have a question for you'all that have, or have built, one of these rfiles....What do you think about the length of the barrel, 39" I beleive? does it look right for the gun?

I have been thinking of trying my hand at one of these kits for while but I generally go for a longer barrel, 42" or more.  I do have an early Lancatser that has a 38" barrel. It's a nice rifle but to my eye, it has always looked a little short to me. 

Thanks for any thoughts or input y'all have....Mick

I don't own either, but a friend of mine had the early Kibler colonial, sold it, and built a woodsrunner, both in .50 caliber. I liked the balance and the way the woodsrunner "points" a lot better personally when I was shooting his rifle.

Seth, Thanks so much for your thoughts!  That is a huge help.
My profile picture is my beloved K9 best friend and soulmate, Buster Brown, who passed away in 2018.  I miss you buddy!