Author Topic: Fresh off the bench  (Read 2081 times)

Offline Gaeckle

  • Hero Member
  • *****
  • Posts: 1338
Fresh off the bench
« on: May 29, 2024, 10:18:13 PM »
Newly finished, a nice handling halfstock. Barrel is a  Green Mountain 45, thirty six inches long and  7/8's across the flats. The lock is an assembled mountain Siler that was built from my dear friend Henry Overmeyer (no longer with us) and to me that makes it special.

Normal brass hardware, the inlays ( german silver), where fashioned from some interesting ones I had seen on originals that I spied while at the Association of Ohio Longrifle Collectors show recently in Marietta Ohio. The stock and barrel was supplied by the customer. The curl is pretty nice and I think I did a good job of exposing it.


























Offline Clint

  • Sr. Member
  • ****
  • Posts: 321
Re: Fresh off the bench
« Reply #1 on: May 30, 2024, 12:28:28 AM »
Sweet rifle, the flash gaurd in back of the drum is a nice touch.
CSW

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18270
  • AKA TimBuckII
Re: Fresh off the bench
« Reply #2 on: May 30, 2024, 12:30:58 AM »
 WOW! John THAT is a Beauty, Every inch of it is, very well done.


   Tim

Offline Seth Isaacson

  • Library_mod
  • Hero Member
  • *
  • Posts: 1073
  • Send me your rifles for the ALR Library!
    • Black Powder Historian
Re: Fresh off the bench
« Reply #3 on: May 30, 2024, 12:55:06 AM »
Beautiful work.
I am the Lead Historian/Firearms Specialist at Rock Island Auction Co., but I am here out of my own personal interests in muzzle loading and history.
*All opinions expressed are mine alone and are NOT meant to represent those of any other entity unless otherwise expressly stated.*

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15535
Re: Fresh off the bench
« Reply #4 on: May 30, 2024, 02:33:24 AM »
Well done. Good job.
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline wormey

  • Full Member
  • ***
  • Posts: 196
Re: Fresh off the bench
« Reply #5 on: May 30, 2024, 04:10:43 AM »
I`m not a particular fan of half-stocked percussion rifles, but this is a real beauty.  This is a class act....everything about it is first class.  Congratulations on your fine workmanship! :)Wormey

Offline B.Barker

  • Hero Member
  • *****
  • Posts: 1372
Re: Fresh off the bench
« Reply #6 on: May 30, 2024, 05:28:37 AM »
I like it John. It looks like many of the old half stocks I've seen made east of the Mississippi.

Offline Gaeckle

  • Hero Member
  • *****
  • Posts: 1338
Re: Fresh off the bench
« Reply #7 on: May 30, 2024, 06:04:22 AM »
Thanks for all the compliments. A while back I was at an OGCA (Ohio Gun Collectors Association) show and the show had a theme for it, the theme was muzzleloading rifles, pistols and their accutroments. There was a fantastic display of rifles made by David Leonard. When I saw those I wanted to make a rifle that would emulate or get the feel of what Leonard would have made. I think I did so. There is a website about this man, simply type David Leonard Ohio rifles and you can view his work

Offline Frozen Run

  • Hero Member
  • *****
  • Posts: 907
Re: Fresh off the bench
« Reply #8 on: May 30, 2024, 08:30:02 AM »
I like how unapologetic the inlays are. Dave hit the nail on the head, you've always made a nice gun but recently the work you've been putting out is on a whole nother level.

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4309
  • If we need it here, make it here. Charlie Daniels
Re: Fresh off the bench
« Reply #9 on: May 30, 2024, 03:28:50 PM »
Nice and clean!
David

Offline Gaeckle

  • Hero Member
  • *****
  • Posts: 1338
Re: Fresh off the bench
« Reply #10 on: May 30, 2024, 05:13:15 PM »
I like how unapologetic the inlays are. Dave hit the nail on the head, you've always made a nice gun but recently the work you've been putting out is on a whole nother level.

I'm glad you like it Donnie.......cause that's your gun

Offline Frozen Run

  • Hero Member
  • *****
  • Posts: 907
Re: Fresh off the bench
« Reply #11 on: May 30, 2024, 07:42:31 PM »
I like how unapologetic the inlays are. Dave hit the nail on the head, you've always made a nice gun but recently the work you've been putting out is on a whole nother level.

I'm glad you like it Donnie.......cause that's your gun

I love it, thank you so much!

Offline Bob Gerard

  • Hero Member
  • *****
  • Posts: 1280
    • Powder Horns and Such
Re: Fresh off the bench
« Reply #12 on: June 01, 2024, 04:52:32 AM »
Wow! I can picture Bill Cody posing with a fine rifle like this

Offline mountainman70

  • Hero Member
  • *****
  • Posts: 2448
  • USAF vet 1971-1972 malmstrom afb,montana
Re: Fresh off the bench
« Reply #13 on: June 01, 2024, 05:32:03 AM »
Swell looking rifle bro. Looks like a Lot of fun inlaying.
Best regards, Dave 8) 8)

Offline Dphariss

  • Hero Member
  • *****
  • Posts: 9860
  • Kill a Commie for your Mommy
Re: Fresh off the bench
« Reply #14 on: June 01, 2024, 05:01:45 PM »
A good 1/2 stock, like this one, or a Vincent or a good copy are works of art. No its not a JP Beck or John Armstrong nor are they supposed to be. Well done they are a stand alone piece of 19th c. art. Like the earlier rifles they are a product of there time. Not ALL the late rifles are clunkers and/or with inlays that seemed to have been loaded into a cannon and shot at the stock.  I like this rifle a lot.
He who dares not offend cannot be honest. Thomas Paine

Offline bpd303

  • Full Member
  • ***
  • Posts: 141
Re: Fresh off the bench
« Reply #15 on: June 01, 2024, 11:55:58 PM »
I like how unapologetic the inlays are. Dave hit the nail on the head, you've always made a nice gun but recently the work you've been putting out is on a whole nother level.

I'm glad you like it Donnie.......cause that's your gun

I can imagine Donnie will love it and I'm envious. Although my grandfathers 36 cal flintlock was a full stock original Ohio Vincent this rifle is it's rival. Good job on the build.

Randy aka bpd303 
Randy aka bpd303        Arkansas Ozarks

Train for tomorrow, as you never know what it will bring to the fight.
I can't control the wind, all I can do is adjust my sails. ~ Semper Paratus

Offline Frozen Run

  • Hero Member
  • *****
  • Posts: 907
Re: Fresh off the bench
« Reply #16 on: June 02, 2024, 05:11:59 AM »
Bob, it's funny that you brought up Bill Cody because a couple days before you made that comment I told John after seeing the finished rifle that it gives me running around my backyard playing cowboy with my air rifle as a child nostalgia!

Randy, I haven't taken possession of it yet but I already love this rifle to death, it's particularly special to me because John is a close friend of mine. I was talking to him a few years back and I said "John, you make a fine rifle, I'd like to own one." So he says what did I want him to make and I said a rifle, and he said what kind of rifle, and I said a Gaeckle Gun. I said there's a lot of people out there making guns but I want one of your guns and only you know what that looks like. I couldn't be happier with the outcome. I'm pretty sure he was sneaky about it and brought it up to the Log Cabin shop a time or two to get my reaction to it and see if it fit me while it was in the works?

John, that curl is electric, you did an outstanding job exposing it! I had to reread your post there because I wasn't sure if that was the stick I gave you or you had to use something else. For context, I got a great deal on several high curl half stock blanks from a member here a while back. One of them in particular was geared for an advanced builder, the board was tiny, enough to make a rifle out of but not much else. I decided it'd be best to give that one to John and I'm really happy I did.         

Offline alacran

  • Hero Member
  • *****
  • Posts: 2205
Re: Fresh off the bench
« Reply #17 on: June 02, 2024, 01:29:52 PM »
This rifle is much more conservative in the amount of inlays than most of the ones that I have seen of the period. The Inlay behind the cheekpiece is very nice.
Mid century 'Ohio" rifles are not everyone's cup of tea, but this one is very appealing. Good Work!
A man's rights rest in three boxes: the ballot box, the jury box, and the cartridge box.  Frederick Douglass

Offline Tony N

  • Hero Member
  • *****
  • Posts: 614
  • Rabbit Hash,Ky
Re: Fresh off the bench
« Reply #18 on: June 02, 2024, 05:11:50 PM »
Very cool!

Tony