« previous next »
Pages: [1]   Go Down

Author Topic: Screw suppliers  (Read 999 times)

Online Gaeckle

  • Hero Member
  • *****
  • Posts: 1360
Screw suppliers
« on: November 02, 2024, 11:35:26 PM »
I know it's been asked before, but who supplies quality screws, bolts and the like?
Logged

Offline CooleyS

  • Jr. Member
  • **
  • Posts: 84
  • S.W. Cooley
Re: Screw suppliers
« Reply #1 on: November 03, 2024, 01:22:01 AM »
Recently I ordered some un-plated wood screws from blacksmithbolt.com. They have a good assortment. The screws were ok, but the steel seemed on the soft side and I had to be very careful to not bugger up the slots. I think I’ll go back to using Muzzleloader Builder’s Supply for my bolts and screws though. MBS seems to be as good or better than any.

-Steve
Logged

Offline elk killer

  • Hero Member
  • *****
  • Posts: 1513
Re: Screw suppliers
« Reply #2 on: November 03, 2024, 03:59:27 AM »
muzzleloader builders supply for sure,
Logged
only flintlocks remain interesting..

Offline Clowdis

  • Sr. Member
  • ****
  • Posts: 454
Re: Screw suppliers
« Reply #3 on: November 03, 2024, 04:46:47 PM »
I will second Blacksmith bolt. Good company.
Logged

Offline Clark Badgett

  • Hero Member
  • *****
  • Posts: 2257
  • Oklahoma
Re: Screw suppliers
« Reply #4 on: November 03, 2024, 09:59:29 PM »
Blacksmith Bolt always seems to have wood screws, but is very lacking in machine screws that would be useful for locks and tangs. What I have ordered from them has come in a prompt manner though.
Logged
Psalms 144

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9687
Re: Screw suppliers
« Reply #5 on: November 03, 2024, 10:40:43 PM »
Soft screws are probably 12L14 which was developed for rapid production of screws and threaded rods,When I was making locks I sometimes sent a cross screw with an 8x32 thread or 2 of them if it was a flintlock and if the mainspring was too close to the front
of the lock plate a 6x32 was sent.The slots were mostly a sharp "V"instead of a machined slot.I have no plans to restart making screws
because the perceived value is nearly zero.
Bob Roller
Logged

Offline horseman

  • Full Member
  • ***
  • Posts: 134
Re: Screw suppliers
« Reply #6 on: November 04, 2024, 05:10:32 AM »
Another recommendation for M. B. S. . :)
Logged

Offline A.Merrill

  • Hero Member
  • *****
  • Posts: 796
Re: Screw suppliers
« Reply #7 on: November 04, 2024, 05:51:14 AM »
Blacksmith bolt.   Al
Logged
Alan K. Merrill

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9687
Re: Screw suppliers
« Reply #8 on: November 04, 2024, 07:52:31 PM »
Quote from: CooleyS on November 03, 2024, 01:22:01 AM
Recently I ordered some un-plated wood screws from blacksmithbolt.com. They have a good assortment. The screws were ok, but the steel seemed on the soft side and I had to be very careful to not bugger up the slots. I think I’ll go back to using Muzzleloader Builder’s Supply for my bolts and screws though. MBS seems to be as good or better than any.

-Steve
Alter an existing screw driver or make one that fits the slot in the screw.I do not own an unaltered screw driver in any size.
Bob Roller
Logged

Offline P.W.Berkuta

  • Hero Member
  • *****
  • Posts: 2213
Re: Screw suppliers
« Reply #9 on: November 04, 2024, 07:57:01 PM »
I've purchased my screws from both Blacksmith Bolt and Muzzleloader Builder's Supply and have had no complaints on either. I do case harden all my bolts and screw heads regardless of where I buy them. ;)
Logged
"The person who says it cannot be done should not interrupt the person who is doing it." - Chinese proverb

Offline Snakeman

  • Starting Member
  • *
  • Posts: 24
Re: Screw suppliers
« Reply #10 on: November 08, 2024, 04:14:05 AM »
McMaster carr might be another place to look
Logged
Pages: [1]   Go Up
« previous next »