where to buy a ramrod drill for a Flintlock with a 44" barrel

[danmart77]

I miss placed my 5/16 bit  and I need another bit

[smylee grouch]

Google MBS, Log Cabin or Track of the Wolf

[Bill Raby]

5/16 drill bit, 48 inches long.

https://www.drillbitsworld.com/Extra-Length-Drill-Bits-High-Speed-Steel-248.html

[john bohan]

I just made one simply by welding a round stock from any of the big box stores to a regular brad point drill,worked great.

[Sidelock]

The price of the one Bill linked too is a gut punch - ouch.  Probably a quality drill though.  I make ram rod drills on a metal lathe, not very hard to do.  If you have a metal lathe or have a buddy who has one, you can make what ever diameter you need rather quickly and pretty cheap too.   

[c deperro]

Tom Snyder in Michigan makes them

[rich pierce]

I just made one simply by welding a round stock from any of the big box stores to a regular brad point drill,worked great.

Bingo!

[45-110]

A 48" pc of drill rod or even mild steel, then mill the groove and profile the cutting edge to look like a 1 flute gun drill. I just did one this week and used mild steel then kasenite the tip. Since this is gun building 101 the solution can be had for very little $$. Probably have done 15 rifles/pistols by this method.