« previous next »
Pages: [1]   Go Down

Author Topic: Early 50 caliber completed  (Read 761 times)

Offline B Kauffman

  • Jr. Member
  • **
  • Posts: 52
Early 50 caliber completed
« on: September 16, 2025, 03:25:42 PM »
This here is my 11th gun. 4th from a plank.
38" Rice 50 caliber B weight.
I used one of those shape it yourself large siler locks from Track.
I enjoyed that in itself. I also changed the tumbler screw to change things up. 
Hard piece of maple from Allen Martin. Barrel inlet and RR hole drilled by Mark Weader.
Allen Martin's guard and buttplate.
I looked at the Joh Schreit 1761 rifle in the Shumway book to copy some of the carving and guide me as I built this one.  I also attempted engraving for the first time which turned out crappy but I gotta learn sometime.
Sights are low like an original. Its a tack driver.
I don't like slings myself but it was this customer's request so I made one and attached it as seen in pictures.
Thanks for looking.





















Logged

Offline B Kauffman

  • Jr. Member
  • **
  • Posts: 52
Re: Early 50 caliber completed
« Reply #1 on: September 16, 2025, 03:27:12 PM »
5 shots at 25 yards off hand.





Logged

Online rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 20841
Re: Early 50 caliber completed
« Reply #2 on: September 16, 2025, 03:42:58 PM »
Nice stout rifle! I like the cheekpiece side shaping and carving especially. The lock shape is great too.
Logged
Andover, Vermont

Offline wattlebuster

  • Hero Member
  • *****
  • Posts: 2147
Re: Early 50 caliber completed
« Reply #3 on: September 16, 2025, 04:32:34 PM »
i like it
Logged
Nothing beats the feel of a handmade southern iron mounted flintlock on a cold frosty morning

Online Daniel Coats

  • Hero Member
  • *****
  • Posts: 1685
Re: Early 50 caliber completed
« Reply #4 on: September 16, 2025, 04:48:00 PM »
Good job on the rifle! I know you're not happy with the engraving but a much bigger error would have been to make it too deep. Can't beat the performance your customer is lucky to get an original looking one of a kind rifle.
Logged
Dan

"Ain't no nipples on a man's rifle"

Offline L T Grey

  • Starting Member
  • *
  • Posts: 14
Re: Early 50 caliber completed
« Reply #5 on: September 16, 2025, 05:48:04 PM »
Well done sir!
Logged

Offline silky

  • Full Member
  • ***
  • Posts: 195
Re: Early 50 caliber completed
« Reply #6 on: September 16, 2025, 06:00:54 PM »
It has a very authentic look to it. And that lock looks great!

- Tom
Logged
Tom Silkowski

Offline RobertS

  • Sr. Member
  • ****
  • Posts: 409
Re: Early 50 caliber completed
« Reply #7 on: September 16, 2025, 06:30:30 PM »
Very nice, and the engraving is nothing to be ashamed of.  If you look at originals, you will see lots with engraving that would be considered poor in comparison to yours.
Logged

Offline mountainman

  • Hero Member
  • *****
  • Posts: 518
  • Laurel Highlands
Re: Early 50 caliber completed
« Reply #8 on: September 16, 2025, 07:53:01 PM »
That's a Beautiful looking early rifle Brian!
Logged

Offline john bohan

  • Sr. Member
  • ****
  • Posts: 373
Re: Early 50 caliber completed
« Reply #9 on: September 16, 2025, 10:55:28 PM »
Since I like your videos I hope you post this build on youtube,good job.
Logged

Offline ScottH

  • Hero Member
  • *****
  • Posts: 620
Re: Early 50 caliber completed
« Reply #10 on: September 16, 2025, 11:03:31 PM »
Beautiful work, I really like the lock shape!  8)
Logged

Offline PEARL DRUMS

  • Jr. Member
  • **
  • Posts: 57
Re: Early 50 caliber completed
« Reply #11 on: September 17, 2025, 02:35:40 AM »
I love it. Especially the butt plate shape.
Logged

Offline StevenV

  • Sr. Member
  • ****
  • Posts: 288
Re: Early 50 caliber completed
« Reply #12 on: September 17, 2025, 11:50:36 AM »
4th gun from plank , that's not to shabby. Lock shape , nice, just enough carving. What stain did you use?????? StevenV
Logged

Offline mountainman

  • Hero Member
  • *****
  • Posts: 518
  • Laurel Highlands
Re: Early 50 caliber completed
« Reply #13 on: September 17, 2025, 04:46:14 PM »
Good lock shaping as well, nice curves!!
Is it still about the same dimensions as the Siler or perhaps more like the Dale Johnson lock?
Logged

Offline godutch

  • Jr. Member
  • **
  • Posts: 94
Re: Early 50 caliber completed
« Reply #14 on: September 17, 2025, 05:08:17 PM »
 Very nice indeed! I would call this an 'understated eye catcher'.  'Multiple unique details all around for the knowing eye.
Logged

Offline gusd

  • Sr. Member
  • ****
  • Posts: 315
Re: Early 50 caliber completed
« Reply #15 on: September 17, 2025, 05:09:58 PM »
great job! :)
Gus
Logged

Offline B Kauffman

  • Jr. Member
  • **
  • Posts: 52
Re: Early 50 caliber completed
« Reply #16 on: September 17, 2025, 06:12:13 PM »
Thank you all.
Yes I will post a youtube video once the owner has it in his possession.
Stain was trans-tint. I went too red and was not happy with it so reached out to my superior and he suggested I rub it back off and add yellow next thing you know I don't know what I did but i was happy with it haha.
The lock is the large siler rectangular plate but I looked at a RE Davis Colonial for the shape.  I wanted that look of a lock but I wanted a faster ignition.... first and last time I used a Davis, I had to dump another $150 into it for Brad Emig to make it spark.
I should mention I made it a 14"LOP by request. Too long for me but its not my gun.

I'm open to critics for anything you see for improvement.
I know I could have inlet the guard a little better.
Logged

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 10188
Re: Early 50 caliber completed
« Reply #17 on: September 17, 2025, 07:31:21 PM »
Quote from: rich pierce on September 16, 2025, 03:42:58 PM
Nice stout rifle! I like the cheekpiece side shaping and carving especially. The lock shape is great too.

It's been said "Only accurate rifles are interesting" and this one filled the idea.I also like the butt plate and  lock shape.
Bob Roller
Logged

Offline Tommy Bruce

  • Sr. Member
  • ****
  • Posts: 459
Re: Early 50 caliber completed
« Reply #18 on: September 17, 2025, 07:43:03 PM »
I like it! Great job on the carving & the engraving isn’t nearly as bad as you let on.   Hard to believe this is only your 4th rifle from a blank.  You have a gift my friend. 
Logged
A man can never have too much red wine, too many books or too much ammunition”
R. Kipling

Offline Daryl

  • Hero Member
  • *****
  • Posts: 16866
Re: Early 50 caliber completed
« Reply #19 on: September 18, 2025, 12:55:18 AM »
Your simple carving and engraving really "shines".
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline tlallijr

  • Full Member
  • ***
  • Posts: 181
Re: Early 50 caliber completed
« Reply #20 on: September 18, 2025, 02:11:15 AM »
Very nice !
Logged

Offline Chocktaw Brave

  • Full Member
  • ***
  • Posts: 206
Re: Early 50 caliber completed
« Reply #21 on: September 18, 2025, 11:15:16 PM »
Beautiful piece of art!
Logged
Pages: [1]   Go Up
« previous next »