« previous next »
Pages: [1]   Go Down

Author Topic: Gun  (Read 8165 times)

Offline Roger Fisher

  • Hero Member
  • *****
  • Posts: 6805
Gun
« on: February 03, 2010, 08:52:53 PM »





Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Gun
« Reply #1 on: February 03, 2010, 09:18:56 PM »
You might want to round off the edges a bit.... ;)
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

rdillon

  • Guest
Re: Gun
« Reply #2 on: February 03, 2010, 09:23:35 PM »
Quote from: Mike Brooks on February 03, 2010, 09:18:56 PM
You might want to round off the edges a bit.... ;)

I agree!!!!!!  Kinda square.  Maybe it's a new kind of "oldtimers school"?

Perhaps a "Chunk-Gun"?????????

Roger what is it??  Do tell ;D
Logged

Daryl

  • Guest
Re: Gun
« Reply #3 on: February 03, 2010, 09:32:45 PM »
Roger, hard part's done so send it to me with all the parts and I'll finish it for you. You can then pick it up next time you're here or I make it to Dixon's again.
« Last Edit: February 03, 2010, 09:33:05 PM by Daryl »
Logged

Offline t.caster

  • Hero Member
  • *****
  • Posts: 3730
Re: Gun
« Reply #4 on: February 03, 2010, 09:36:05 PM »
A CHUNK GUN, RIGHT?
Logged
Tom C.

jimc2

  • Guest
Re: Gun
« Reply #5 on: February 03, 2010, 10:55:02 PM »
Dont let them kid you roger i think its gorgeous the stain could be a little darker
Logged

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas A Curran
Re: Gun
« Reply #6 on: February 03, 2010, 10:55:18 PM »
It may be a log gun.

Roger missed the 'over' when they were talking about 'over the log shoots'.

Now, gents, this is an historic moment. I believe this is the first time Roger has posted pictures. Congrats , Roger!

Nice inlet, by the way.

Tom
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

westerner

  • Guest
Re: Gun
« Reply #7 on: February 03, 2010, 11:27:35 PM »
I like it so far. Lump of coal?? 

             Joe.  :)
Logged

Offline bdixon

  • Sr. Member
  • ****
  • Posts: 250
  • F & AM #376.
Re: Gun
« Reply #8 on: February 03, 2010, 11:35:29 PM »
Wow Roger, you are taking quite a spanking.  Hang in there, Cowboy up!
Logged

billd

  • Guest
Re: Gun
« Reply #9 on: February 03, 2010, 11:41:34 PM »
Wow!!!!!   I love the brass touch hole liner.   Are you bringing it to Lewisburg?  Using it at Boyertown on Sunday?

Just kidding, a few swipes with the sanding block and you'll have a fine looking gun.

See you Friday,
Bill
Logged

Offline smshea

  • Hero Member
  • *****
  • Posts: 592
    • www.scottshearifles.com
Re: Gun
« Reply #10 on: February 03, 2010, 11:42:11 PM »
These guys are harsh Roger! ??? Just as is, You can likely shoot it better than most of us! ;)
Logged

billd

  • Guest
Re: Gun
« Reply #11 on: February 03, 2010, 11:44:22 PM »
I see a dremel,   :o but it looks like an antique one.  ;D

Bill
Logged

rdillon

  • Guest
Re: Gun
« Reply #12 on: February 03, 2010, 11:45:31 PM »
Wait!!!!!!!  I got it.  This is a riddle.  Perhaps it's not the "gun"at all.  Maybe we are supposed to look at somethiing on the workbench to give us a clue!  Hmmmmmmmm..... ???
Logged

Offline Dale Campbell

  • Sr. Member
  • ****
  • Posts: 327
Re: Gun
« Reply #13 on: February 04, 2010, 12:06:29 AM »
Quote from: Daryl on February 03, 2010, 09:32:45 PM
Roger, hard part's done so send it to me with all the parts and I'll finish it for you. You can then pick it up next time you're here or I make it to Dixon's again.

I'd take him up on that offer before he changes his mind.  He didn't say nothin' about chargin' you, and you could get a trip up north to boot...
Logged
Best regards,
Dale

Offline Stophel

  • Hero Member
  • *****
  • Posts: 4532
  • Chris Immel
Re: Gun
« Reply #14 on: February 04, 2010, 12:36:18 AM »
Must be a hand-match fired hand-gonne since there ain't no lock in it.
Logged
When a reenactor says "They didn't write everything down"   what that really means is: "I'm too lazy to look for documentation."

Offline t.caster

  • Hero Member
  • *****
  • Posts: 3730
Re: Gun
« Reply #15 on: February 04, 2010, 01:00:30 AM »
Getting some nice wear and PATINA, how longs it been on your bench?
Logged
Tom C.

ken

  • Guest
Re: Gun
« Reply #16 on: February 04, 2010, 01:15:27 AM »
New log gun I see!! Roger is this your fastes build? Nice work . At least your bench is cleaner than mine.
Logged

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: Gun
« Reply #17 on: February 04, 2010, 01:40:19 AM »
It's coming along very well Roger, and the rest of them think so too, though they aren't sayin' so.  Good lock inlet - sear tail hole squared, no extra wood removed.  A little more has to come off under the hook end of the mainspring, I see.  Scrapings.  thanks for showing us.
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline Dr. Tim-Boone

  • Global Moderator
  • Hero Member
  • *
  • Posts: 6538
  • I Like this hat!!
Re: Gun
« Reply #18 on: February 04, 2010, 01:53:07 AM »
Roger I think they are saying the inside looks pretty good!!  Are you going to give us progress update pictures or is this one done??   ;D :D
Logged
De Oppresso Liber
Marietta, GA

Liberty is the only thing you cannot have unless you are willing to give it to others. – William Allen White

Learning is not compulsory...........neither is survival! - W. Edwards Deming

Offline Roger Fisher

  • Hero Member
  • *****
  • Posts: 6805
Re: Gun
« Reply #19 on: February 04, 2010, 03:11:51 AM »
Holy Canolies and here I thought I was doing decent! ::) ;D

First off, I recall someone (I'm thinkin it's the young guy that likes highballs) suggesting more work in progress photos, so far be it from me to not cooperate!!!
They do show the nitty gritty!   Oh yeah, I couldn't post photos if my life depended on it...That is one reason to have a daughter in law... Sure more photos oncoming - $#*! I'm not proud.  I can screw up more than 10 other guys.

Rounded edges - there will be plenty more, on down the road.. 

Chunk gun now there's a novel idea.   What I do in fact need is something I can hold up offhand  (Chiropractic profession is making $ off of me for weeks now! Ol Arthur and his itis found a home in my left shoulder. :'( 
Logged

Offline Larry Luck

  • Administrator
  • Hero Member
  • *
  • Posts: 1806
  • Larry Luck
Re: Gun
« Reply #20 on: February 04, 2010, 03:57:26 AM »
Remember, Gunbuilding is a full contact sport!
Thanks, Roger.
Larry Luck
Logged

Daryl

  • Guest
Re: Gun
« Reply #21 on: February 04, 2010, 04:37:29 AM »
Quote from: Dale C on February 04, 2010, 12:06:29 AM
Quote from: Daryl on February 03, 2010, 09:32:45 PM
Roger, hard part's done so send it to me with all the parts and I'll finish it for you. You can then pick it up next time you're here or I make it to Dixon's again.

I'd take him up on that offer before he changes his mind.  He didn't say nothin' about chargin' you, and you could get a trip up north to boot...

I'm good with sandpaper and a dremel. ;D
Logged
Pages: [1]   Go Up
« previous next »