Author Topic: honing strop question  (Read 3830 times)

Offline Dan Herda

  • Full Member
  • ***
  • Posts: 226
honing strop question
« on: February 14, 2010, 11:04:14 PM »
When using a leather honing strop,is it necessary to roughen up the surface every so often to make it effective? It seems to be kind of glazed and blackened. I am new at this so any help is appreciated.Thank you,Dan

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas  A Curran
Re: honing strop question
« Reply #1 on: February 14, 2010, 11:22:16 PM »
Maybe it could be cleaned somehow, wiped with WD-40, or something, to get the dirty gunk off the strop?

I use wooden strops, and just add more compound when they seem to need it.

Quote
roughen up the surface

When you say roughen, I am thinking the surface will become spongy, which will wrap around the tool as you strop it, rounding the edge, which is not in your best interest. A firm strop will minimize the rounding of the edge.
« Last Edit: February 14, 2010, 11:24:50 PM by Acer Saccharum »
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

Kentucky Jeff

  • Guest
Re: honing strop question
« Reply #2 on: February 14, 2010, 11:23:35 PM »
You can take a green scotch brite pad and clean it up a little with that.  Be sure to re-load it with some new compound.  I find it helpful to use a hair dryer to heat it up then rub in the compound with my fingers.  

Offline Steve Bookout

  • Sr. Member
  • ****
  • Posts: 333
  • AF & AM, #59
    • Toad Hall Rifleshop
Re: honing strop question
« Reply #3 on: February 14, 2010, 11:59:25 PM »
I back my strops with a piece of walnut.  Red jewler's rouge is what I use for compound.  A smear of that will usually last me 2-3 weeks.  The strop for my straight razor is unbacked and it gets a dose of shaving soap when stroping.  The final strop is with a linen strap or strop.  Cheers, Bookie
Steve Bookout, PhD, CM, BSM
University of South Viet Nam
Class of 1969
Class of 1970
Class of 1971

Offline Dan Herda

  • Full Member
  • ***
  • Posts: 226
Re: honing strop question
« Reply #4 on: February 15, 2010, 12:43:52 AM »
Thank you,I should have specified that this strop is a store bought flexcut slipstrop,so it is backed with wood.Where there is no leather ,there are shapes,convex,concave and angular in the wood itself.But I was mainly talking about the leather areas,which are convex and flat.The compound that was provided is a yellow stick.
« Last Edit: February 15, 2010, 12:50:59 AM by ridjrunr »

Offline Dennis Glazener

  • Administrator
  • Hero Member
  • *
  • Posts: 19487
    • GillespieRifles
Re: honing strop question
« Reply #5 on: February 15, 2010, 01:33:53 AM »
I have one of those and have never cleaned it. Might need it but it seems to work as well as ever. All I do is load it up with abrasive from time to time.
Treat the rough and smooth sides the same.
Dennis
"I never considered a difference of opinion in politics, in religion, in philosophy, as cause for withdrawing from a friend" - Thomas Jefferson

Offline Dan Herda

  • Full Member
  • ***
  • Posts: 226
Re: honing strop question
« Reply #6 on: February 15, 2010, 02:25:40 AM »
Thank you Dennis.I just started using it this morning and it seemed to glaze quickly but I guess thats ok as long as I get sharp tools !

Offline Dr. Tim-Boone

  • Global Moderator
  • Hero Member
  • *
  • Posts: 6538
  • I Like this hat!!
Re: honing strop question
« Reply #7 on: February 15, 2010, 03:58:08 AM »
When it gets really black, put more yellow compound on it. I have had mine 5 years and it works OK.  It looks a little disreputable and I have some nice heavy veg tanned leather I am thinking about gluing to a paddle to make a smooth strop, just to see if it helps.
De Oppresso Liber
Marietta, GA

Liberty is the only thing you cannot have unless you are willing to give it to others. – William Allen White

Learning is not compulsory...........neither is survival! - W. Edwards Deming