Author Topic: Let's see your squirrel rifle!!! (Read 380892 times)

flintlock hunter · « **Reply #800 on:** April 22, 2020, 05:17:37 PM »

Just finishing up this silver mounted 36. half stock. Its for the oldest grandchild to start hunting squirrels this coming season. All that's left is a little engraving on the lock.

D. Taylor Sapergia · « **Reply #801 on:** April 22, 2020, 08:31:29 PM »

Pretty rifle.

Molly · « **Reply #802 on:** April 23, 2020, 04:55:26 AM »

Got one for ya! 25 cal by H. L. Harrison. One of my three favorites.

upload

Daryl · « **Reply #803 on:** April 23, 2020, 05:02:49 AM »

That's a nice one, Molly.
Flintlock Hunter - very nice indeed. Not too long a pull for him, eh?

Molly · « **Reply #804 on:** April 23, 2020, 05:28:29 AM »

Just for fun I'll put all 3 up. Harrison on the top, Roger Sells in the middle (32 cal) and Don Stith 38 cal on the bottom. Roger's rifle can via a great gentleman, Mr. Bill Warden. That purchase was one I will never forget. And it's a story to remember but for another time.

alacran · « **Reply #805 on:** April 23, 2020, 03:02:02 PM »

That .25 is a beauty!

hanshi · « **Reply #806 on:** April 23, 2020, 09:46:28 PM »

Oh, my! I need to pause and catch my breath!

littlefat · « **Reply #807 on:** April 24, 2020, 04:55:07 PM »

Here is my .40. made a peep sight for it cause I'm getting old

image upload

hanshi · « **Reply #808 on:** April 24, 2020, 11:50:56 PM »

I need to make one.

martin9 · « **Reply #809 on:** January 20, 2021, 08:24:17 PM »

Here's one I just finished from a parts set I got from WayneB. It started as a Knob Mountain Melchior Fordney parts set. I was too chicken to attempt all that carving on birdseye maple so I made a southern rifle instead. 42"X 3/4" .36 caliber getz barrel. Chambers Late Ketland and Davis triggers. I used a Kibler SMR buttplate and rear sight. Still playing with loads but so far it's shot great with everything I've put down it

Bob McBride · « **Reply #810 on:** January 20, 2021, 08:40:55 PM »

I recently picked up this little Joe Schell halfstock .36 for when I feel like going for the bushytails with a cap gun...

Percy · « **Reply #811 on:** January 21, 2021, 10:40:07 PM »

martin9, That's a great looking piece of wood on that rifle. Well done.

Percy

Tony N · « **Reply #812 on:** January 22, 2021, 01:11:48 AM »

Bob that’s a good looking rifle, Joe does excellent work in my opinion

Tony

Bob McBride · « **Reply #813 on:** January 22, 2021, 04:00:10 AM »

Quote from: T. Nienaber on January 22, 2021, 01:11:48 AM

Bob that’s a good looking rifle, Joe does excellent work in my opinion

Tony

I think so too. I have a soft spot for the dainty little guns.

martin9 · « **Reply #814 on:** January 22, 2021, 05:00:56 AM »

Quote from: Percy on January 21, 2021, 10:40:07 PM

martin9, That's a great looking piece of wood on that rifle. Well done.

Percy

Thank you! I thought about going a little lighter with it to make the birdseye more dramatic but I like darker finishes so stuck with what I know.

Einsiedler · « **Reply #815 on:** January 22, 2021, 04:42:07 PM »

Last Monday morning in the creek bottom. Ended up with three tree rats!

Daryl · « **Reply #816 on:** January 23, 2021, 04:29:29 AM »

Quote from: martin9 on January 20, 2021, 08:24:17 PM

Here's one I just finished from a parts set I got from WayneB. It started as a Knob Mountain Melchior Fordney parts set. I was too chicken to attempt all that carving on birdseye maple so I made a southern rifle instead. 42"X 3/4" .36 caliber getz barrel. Chambers Late Ketland and Davis triggers. I used a Kibler SMR buttplate and rear sight. Still playing with loads but so far it's shot great with everything I've put down it

martin9- great looking rifle. With that birdseye maple, it needs no other embellishments.

Daryl · « **Reply #817 on:** January 23, 2021, 04:31:32 AM »

Quote from: Einsiedler on January 22, 2021, 04:42:07 PM

Last Monday morning in the creek bottom. Ended up with three tree rats!

Einsiedler - that is a really nice rifle. Well done on the rats, too. Looks like a fox squirrel with that red belly, but smallish.

Goose · « **Reply #818 on:** January 24, 2021, 12:19:58 AM »

Hey martin9, the rifle turned out great. I'm glad it went to someone who did the wood justice. How much does it weigh? I have another 36 barrel here, trying to decide what style I want to build it in. I also have a 50 cal in 13/16 across the flats, should make a nice light weight piece.

martin9 · « **Reply #819 on:** January 24, 2021, 01:16:56 AM »

Thanks! I'm happy with how it turned out.... I think my pics make it look chunkier than it is though for some reason. It weighs just a little over 7#s. Holds and shoots really nice. Just waiting on deer season to end here and I'll be taking it after squirrels and rabbits.

I've never seen a .50 barrel that small. That'll make a sweet handling rifle.

L Meadows · « **Reply #820 on:** January 24, 2021, 08:11:40 PM »

Quote from: Bob McBride on January 20, 2021, 08:40:55 PM

I recently picked up this little Joe Schell halfstock .36 for when I feel like going for the bushytails with a cap gun...

Bob could we see some more pics? Great little rifle!

iloco · « **Reply #821 on:** January 24, 2021, 09:03:04 PM »

I have a picture of the left side of that rifle. I use to own the rifle.

L Meadows · « **Reply #822 on:** January 24, 2021, 10:12:04 PM »

Quote from: iloco on January 24, 2021, 09:03:04 PM

I have a picture of the left side of that rifle. I use to own the rifle.

That is a sweet thin little rifle!

Bob McBride · « **Reply #823 on:** January 25, 2021, 01:44:21 AM »

I haven't gotten it in hand yet. It's in the hands of the USPS. I'll post a bunch when it arrives.

L Meadows · « **Reply #824 on:** March 07, 2021, 10:10:24 PM »

Had a lead on this rifle last year and let it get away. Anyone know it's whereabouts or a AB Conley rifle one might buy?

Quote from: Ky-Flinter on May 14, 2016, 11:23:30 PM

Here’s an Eastern Ky squirrel rifle for ya. Built in the 70’s by A.B. Conley of Salyersville, Ky. Barrel is a .36 caliber, 13/16 x 42, made by Burgess Cassidy who got his start making barrels with Rex Maxey. The lock is a small Siler built by Herman Stone.

-Ron

News:

Author Topic: Let's see your squirrel rifle!!! (Read 380892 times)

Goose