AmericanLongRifles Forums
General discussion => Gun Building => Topic started by: john bohan on July 28, 2025, 10:38:31 PM
-
I was fortunate to run into Rich Peirce at Kempton and chat with him a bit. I told him I made this engraver machine and he ask me to post about it. First off I watched Rick Alexander homemade engraving machine. Its a 6 part video with drawings etc.He builds it entirley on a drill press but a lathe would be nice. I guess it cost me $125 or so,Rick will tell you all the parts to buy. I had my doubts about this thing working,during the video he says this thing will work and mine does.Go to youtube Rick Alexander homemade engraving. Have fun.
(https://i.ibb.co/m5nCJxv3/20250728-131930-1.jpg) (https://ibb.co/YB572rDx)
-
Would you look at this? Another rabbit hole! Watched part one, subscribed.
-
Would you look at this? Another rabbit hole! Watched part one, subscribed.
Well....what else are ya doin?
-
I've been experimenting a bit with a couple of electronic (solenoid) powered versions, but need more time to see if I can make it work.
If it does, it'll be a very affordable.
-
Jakob, you dont need much to make this thing. A half in. bolt,round stockfor the piston,the video tells you what to buy by brand name for the compresser and electronics.
-
hey jhon checking to see if you are coming to the show at putneyville this weekend trader joe said to getahold of cody yoho and see if he wants to come and do some blacksmithing and to bring his guitar
-
Try to stop in on saturday Al.