« previous next »
Pages: [1]   Go Down

Author Topic: hawken  (Read 3965 times)

Offline bjmac

  • Jr. Member
  • **
  • Posts: 90
hawken
« on: December 16, 2010, 11:43:07 PM »
I'm ready to shoot my newly completed T/C hawken .54 that I built from a kit. My question is: should I first proof the barrel? If so, what kind of load would be recommended? Thanks.
Logged

Offline bgf

  • Hero Member
  • *****
  • Posts: 1403
Re: hawken
« Reply #1 on: December 17, 2010, 12:16:16 AM »
I think I would just use the maximum charge (for example, 120gr. FFg -- I don't really know what it is in the manual) listed by the manufacturer and call it a day. 
Logged

Offline Ky-Flinter

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7500
  • Born in Kentucke, just 250 years late
Re: hawken
« Reply #2 on: December 17, 2010, 12:28:54 AM »
Hi Bjmac,

Welcome to ALR.  There was an interesting thread on this topic recently.  Here's a link..... http://americanlongrifles.org/forum/index.php?topic=12937.0

What does T/C say is the maximum load in their .54 barrel?  I would use that as a "proof" load.

-Ron
Logged
Ron Winfield

Life is too short to hunt with an ugly gun. -Nate McKenzie

Offline Ky-Flinter

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7500
  • Born in Kentucke, just 250 years late
Re: hawken
« Reply #3 on: December 17, 2010, 12:30:04 AM »
Haha.....  Bgf, you beat me to it!

-Ron
Logged
Ron Winfield

Life is too short to hunt with an ugly gun. -Nate McKenzie

Offline bgf

  • Hero Member
  • *****
  • Posts: 1403
Re: hawken
« Reply #4 on: December 17, 2010, 12:43:12 AM »
Quote from: KyFlinter on December 17, 2010, 12:30:04 AM
Haha.....  Bgf, you beat me to it!

-Ron

Yes, but you had more information and a link.  I can't find a .54 caliber T/C Hawken load chart, only .50 (110gr. max).
Logged

Offline bjmac

  • Jr. Member
  • **
  • Posts: 90
Re: hawken
« Reply #5 on: December 17, 2010, 01:14:00 AM »
thanks for the responses, guys. The kit didn't come with a manual (it's from the early eighties), so I figured that I would rather be safe than sorry, because there seems to be more useful knowledge here than just about anywhere.
Logged

roundball

  • Guest
Re: hawken
« Reply #6 on: December 17, 2010, 01:25:41 AM »
Go to www.TCArms.com, Manuals section, View and/or download the manual.

Data charts are in the back, Max listed for a .54cal is 120grns Goex 2F.

Not sure why you'd need to 'proof' it, or what you'd look for, they are mass produced barrels with a history for excellent quality...
Logged

Offline Dphariss

  • Hero Member
  • *****
  • Posts: 9920
  • Kill a Commie for your Mommy
Re: hawken
« Reply #7 on: December 17, 2010, 07:38:58 AM »
Quote from: roundball on December 17, 2010, 01:25:41 AM
Go to www.TCArms.com, Manuals section, View and/or download the manual.

Data charts are in the back, Max listed for a .54cal is 120grns Goex 2F.

Not sure why you'd need to 'proof' it, or what you'd look for, they are mass produced barrels with a history for excellent quality...

I guess this does not take into account the rash of catastrophic barrel failures in early production. But that was 30 odd years ago.

I would proof it with 2 charges of powder and 2 balls. Just to make sure none of the add ons , like the breech come adrift or are machined just a little too deep in some spot.
If a percussion its harder to proof out of the stock than a flint.

Dan
Logged
He who dares not offend cannot be honest. Thomas Paine
Pages: [1]   Go Up
« previous next »