Author Topic: Barrel ID  (Read 2248 times)

mjm46@bellsouth.net

  • Guest
Barrel ID
« on: September 25, 2012, 07:00:29 AM »
I recently looked at a used rifle. It was in very good shape. The bore was imaculate, I put a light in it. It had a straight barrel with a square bottom 8 groove rifling pattern.

Anyone know who made the barrel?

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7906
Re: Barrel ID
« Reply #1 on: September 25, 2012, 01:23:36 PM »
Need more info, were groves wider than lands? Rate of twist ? any markings on barrel flats or breech end ?

mjm46@bellsouth.net

  • Guest
Re: Barrel ID
« Reply #2 on: September 25, 2012, 03:16:59 PM »
Smylee, the rifle was at a store and in used condition no markings were visible on the barrel but I didn't remove the barrel. The lands and grooves were about the same size with square bottom grooves.

I thought the 8 groove pattern might identify the barrel, I've never seen one with 8 grooves.

Daryl

  • Guest
Re: Barrel ID
« Reply #3 on: September 25, 2012, 04:46:56 PM »
Michael- have a look at this forum threadand see how many 8 grooved barrels there are.

http://americanlongrifles.org/forum/index.php?topic=23205.0