« previous next »
Pages: [1]   Go Down

Author Topic: Jewelers saw question  (Read 2932 times)

Offline Brian Jordan

  • Hero Member
  • *****
  • Posts: 548
  • Pennsylvania
Jewelers saw question
« on: March 05, 2015, 12:51:07 AM »
Today I broke the handle off of my jewelers saw. I thought I had purchased a decent one from Brownells...guess I was wrong. I wasn't hogging either with it either. I had a small slotting file clamped in it and I was slotting screw heads.

Can you guys tell me a quality brand saw I can buy that will last?

Thanks
Brian
Logged
Elizabeth, PA

"No free man shall ever be debarred the use of arms"...Thomas Jefferson

Let's Go Brandon!

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas A Curran
Re: Jewelers saw question
« Reply #1 on: March 05, 2015, 01:00:21 AM »
Go to Otto Frei, Gesswein or Rio Grande.

I think Rio sells a lot of lower end stuff, and some good stuff too. Don't go for cheapest. The clam screws are the first things to go, screws strip, or tapped holes strip out. Get a good saw.

Page with frames: http://www.riogrande.com/Category/Tools-and-Equipment/120/Saw-Blades-and-Frames/340

Swiss frame: http://www.riogrande.com/Product/Swiss-Adjustable-3-Saw-Frame/110058?Pos=19

Knew Concepts: http://www.riogrande.com/Product/Original-Knew-Concepts-Jewelers-3--Saw-Frame/110137?Pos=27


Jeweler's Blade size and numbers
« Last Edit: March 05, 2015, 01:05:25 AM by Acer Saccharum »
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

kaintuck

  • Guest
Re: Jewelers saw question
« Reply #2 on: March 05, 2015, 01:32:48 AM »
then get a small jar to put all the broken blades in! ;D :'(

I like mine....and when you NEED a small blade, nothen else will do!

marc n tomtom
Logged

Offline smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7017
Re: Jewelers saw question
« Reply #3 on: March 05, 2015, 03:07:43 AM »
Hi Brian,
Look up "Knew Concept" jewelers saws.  They are hands down the best and although more expensive, you will save a lot on broken saw blades.

dave 
Logged
"The main accomplishment of modern economics is to make astrology look good."

Offline Kermit

  • Hero Member
  • *****
  • Posts: 3099
Re: Jewelers saw question
« Reply #4 on: March 05, 2015, 06:41:33 PM »
I have the Knew Concepts coping saw. Worth every dime. Still have my grandfather's Disston, but never use it any longer.
Logged
"Anything worth doing is worth doing slowly." Mae West
Pages: [1]   Go Up
« previous next »