« previous next »
Pages: [1]   Go Down

Author Topic: Barrel Maker ID Help  (Read 2865 times)

Offline chuck

  • Starting Member
  • *
  • Posts: 25
Barrel Maker ID Help
« on: November 17, 2009, 01:18:54 AM »
I have a longrifle with a barrel that is stamped TRYON Phila on the top flat in the usual position. On a lower flat near the plug is stamped an elongated oval with the letters GR inside.  The barrel is 47 1/2" long and is swamped. The rifle could be from the 1820 to 1830 period. Anyone have an idea as to barrel maker?
Chuck
Logged

Offline Dennis Glazener

  • Administrator
  • Hero Member
  • *
  • Posts: 19483
    • GillespieRifles
Re: Barrel Maker ID Help
« Reply #1 on: November 17, 2009, 02:58:58 AM »
George and E. K. Tryon were commercial maker's of guns in Philadelphia PA. I think George retired in the 1840''s.  Edward joined the company in the late 1830's and retired in the 1860's.
Dennis
Logged
"I never considered a difference of opinion in politics, in religion, in philosophy, as cause for withdrawing from a friend" - Thomas Jefferson

Offline chuck

  • Starting Member
  • *
  • Posts: 25
Re: Barrel Maker ID Help
« Reply #2 on: November 17, 2009, 05:28:09 PM »
Dennis,  thank you for the Tryon information, I would also like any information anyone may have on the GR stamp. Proofers mark or maker??
Logged
Pages: [1]   Go Up
« previous next »