Author Topic: Flat horn  (Read 4364 times)

Offline Gun Butcher

  • Full Member
  • ***
  • Posts: 178
Flat horn
« on: October 24, 2017, 01:54:55 AM »
Managed to finish this little flat horn today. It 3/4" thick, 2 1/2 " wide at the base , and about 8" tall. Cherry base and top with a threaded antler tip.
Thanks for looking

Ron








Member Honorable Company of Horners
Member of the CLA

Offline Gun_Nut_73

  • Sr. Member
  • ****
  • Posts: 314
Re: Flat horn
« Reply #1 on: October 24, 2017, 03:12:15 AM »
Very nice work.

Offline horseman

  • Full Member
  • ***
  • Posts: 134
Re: Flat horn
« Reply #2 on: October 24, 2017, 03:20:26 AM »
Very nice!  I really like the rifleman scrimshaw, too. :)

Offline David R. Pennington

  • Hero Member
  • *****
  • Posts: 2928
Re: Flat horn
« Reply #3 on: October 24, 2017, 03:24:18 AM »
wouldn't that be handy for day hunt!
VITA BREVIS- ARS LONGA

Fiftyfour

  • Guest
Re: Flat horn
« Reply #4 on: October 24, 2017, 03:32:39 AM »
What size tap and die did you use to cut the threads?

Offline Gun Butcher

  • Full Member
  • ***
  • Posts: 178
Re: Flat horn
« Reply #5 on: October 24, 2017, 04:34:58 AM »
On these small horns I usually use a 1/2-13 tap and die. I always try to use the biggest size that I can but the size of the horn dictates what you can get away with.

Ron
Member Honorable Company of Horners
Member of the CLA

Offline Old Salt

  • Full Member
  • ***
  • Posts: 153
  • All gave some. Some gave all
Re: Flat horn
« Reply #6 on: October 24, 2017, 06:20:36 AM »
That some very fine work. I have made two flat horns, my son has one , and the other went a friend . I never learnt to do scrimshaw, that did not look a chicken scratched  it.
All gave some Some gave all

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18391
  • AKA TimBuckII
Re: Flat horn
« Reply #7 on: October 24, 2017, 02:41:13 PM »
 Nice work, Great carving design.

    Tim

 

Offline Gun Butcher

  • Full Member
  • ***
  • Posts: 178
Re: Flat horn
« Reply #8 on: October 24, 2017, 02:52:55 PM »
Thanks everyone. I appreciate the kind words.

Ron
Member Honorable Company of Horners
Member of the CLA

Horner75

  • Guest
Re: Flat horn
« Reply #9 on: October 24, 2017, 07:56:10 PM »
Ya came a long way Pilgrim! ........... Looking good 10-4 !

Offline Gun Butcher

  • Full Member
  • ***
  • Posts: 178
Re: Flat horn
« Reply #10 on: October 25, 2017, 02:15:54 AM »
Hey you old road dog it's good to hear from you. If I am doing any good at all you are one of the reasons. You always gave me good feedback and gave me options for cleaning things up.
Take care of yourself and keep the shiny side up.

Ron
Member Honorable Company of Horners
Member of the CLA

JB

  • Guest
Re: Flat horn
« Reply #11 on: October 25, 2017, 02:56:23 AM »
super nice.

Offline Percy

  • Full Member
  • ***
  • Posts: 225
Re: Flat horn
« Reply #12 on: October 25, 2017, 03:48:28 PM »
Very nice work!

brik

  • Guest
Re: Flat horn
« Reply #13 on: October 31, 2017, 04:26:50 AM »
very cool work

Offline Gun Butcher

  • Full Member
  • ***
  • Posts: 178
Re: Flat horn
« Reply #14 on: November 02, 2017, 12:35:41 AM »
Thank you gentlemen.
Member Honorable Company of Horners
Member of the CLA

Curtis Makamson

  • Guest
Re: Flat horn
« Reply #15 on: November 07, 2017, 08:59:02 PM »
As mentioned on another site, that is  a really fine piece of work.  There is just enough engraving to make it look right.  I, on the other hand, have a tendency to overwork engraving. 

By the way, Ron, a couple of years ago a package from you arrived at this address containing one of your horn cups.  My wife has a china cabinet full of her fine china and crystal.  Low and behold, your horn cup has taken up residence among all of that highbrow foo foo and is sitting front and center at eye level.

Offline Gun Butcher

  • Full Member
  • ***
  • Posts: 178
Re: Flat horn
« Reply #16 on: November 08, 2017, 03:49:37 AM »
Curtis I am positive that that cup is in much better company than it ever expected to be.
I am honored kind sir.

Ron
Member Honorable Company of Horners
Member of the CLA

Offline Pukka Bundook

  • Hero Member
  • *****
  • Posts: 3477
Re: Flat horn
« Reply #17 on: November 08, 2017, 06:28:16 AM »
A very nice job on the horn!

Squashing a horn can be very nerve-wracking!  LOl!!
I made a flattened one out of copper one time;  Fell out of a tree and landed on it.   ;)
« Last Edit: November 09, 2017, 06:01:31 AM by Pukka Bundook »