« previous next »
Pages: [1]   Go Down

Author Topic: The life of an apprentice.  (Read 2347 times)

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
The life of an apprentice.
« on: November 15, 2018, 10:23:28 PM »
Checking out my apprentice's skills this morning.  We are working on inletting a barrel for Mike Brooks.
David




Logged

Offline BOB HILL

  • Hero Member
  • *****
  • Posts: 2284
Re: The life of an apprentice.
« Reply #1 on: November 15, 2018, 10:32:42 PM »
And a fine looking young man. I'm sure he's a quick learner.
Bob
Logged
South Carolina Lowcountry

Offline smokinbuck

  • Hero Member
  • *****
  • Posts: 3005
Re: The life of an apprentice.
« Reply #2 on: November 15, 2018, 11:20:50 PM »
Best of two worlds, an accomplished apprentice and a BIG smile.
Mark
Logged
Mark

Offline Kingsburyarms

  • Jon Rider
  • member 2
  • Hero Member
  • ****
  • Posts: 956
  • Jon Rider
Re: The life of an apprentice.
« Reply #3 on: November 15, 2018, 11:22:35 PM »
Great picture, and he probably works faster than Mike....  ;)
Logged

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15846
Re: The life of an apprentice.
« Reply #4 on: November 16, 2018, 12:00:43 AM »
I see he wants you to cut it, RIGHT THERE, Grampa!
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: The life of an apprentice.
« Reply #5 on: November 16, 2018, 12:07:13 AM »
That really fills me with confidence...... ???
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Greg Pennell

  • Hero Member
  • *****
  • Posts: 1523
Re: The life of an apprentice.
« Reply #6 on: November 16, 2018, 12:24:07 AM »
Nothin’ like startin’ ‘em young... :o

Good looking apprentice!

Greg
Logged
“Let your gun therefore be the constant companion of your walks” Thomas Jefferson

Offline John Archer

  • Sr. Member
  • ****
  • Posts: 364
  • I solemnly swear that I am up to no good
Re: The life of an apprentice.
« Reply #7 on: November 16, 2018, 12:42:02 AM »
He's sure growing fast Dave....it appears that he likes Allentown rifles!

John
Logged
I cannot be left unsupervised.
(Sent from my immobile dial-operated telephone)

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9694
Re: The life of an apprentice.
« Reply #8 on: November 16, 2018, 12:42:56 AM »
Quote from: g.pennell on November 16, 2018, 12:24:07 AM
Nothin’ like startin’ ‘em young... :o

Good looking apprentice!

Greg

Good looking boy and this may stimulate an interest that will go on and on.

Bob Roller
Logged

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: The life of an apprentice.
« Reply #9 on: November 16, 2018, 12:59:40 AM »
Quote from: Bob Roller on November 16, 2018, 12:42:56 AM
Quote from: g.pennell on November 16, 2018, 12:24:07 AM
Nothin’ like startin’ ‘em young... :o

Good looking apprentice!

Greg

Good looking boy and this may stimulate an interest that will go on and on.

Bob Roller

Between his dad being an avid hunter and him hanging out in the shop with me he is off to a good start.  He has already caught his first fish.
David
« Last Edit: November 16, 2018, 04:55:11 AM by Ky-Flinter »
Logged

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: The life of an apprentice.
« Reply #10 on: November 16, 2018, 01:00:55 AM »
Quote from: Mike Brooks on November 16, 2018, 12:07:13 AM
That really fills me with confidence...... ???
I thought you would like that comment Mike.  Fortunately for you, he does not like loud noises so when I start up the duplicating machine he will be long gone. ;D
David
« Last Edit: November 16, 2018, 01:02:19 AM by David Rase »
Logged

Offline smallpatch

  • Hero Member
  • *****
  • Posts: 4107
  • Dane Lund
Re: The life of an apprentice.
« Reply #11 on: November 16, 2018, 01:36:53 AM »
Looks like another Lehigh for Mike.

David, start em young.  That way you can relax and watch HIM work.
Logged
In His grip,

Dane

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: The life of an apprentice.
« Reply #12 on: November 16, 2018, 02:18:23 AM »
Quote from: smallpatch on November 16, 2018, 01:36:53 AM
Looks like another Lehigh for Mike.

David, start em young.  That way you can relax and watch HIM work.
Yep, has a slim Hoyt .38 swamped barrel, should be fun.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Dennis Glazener

  • Administrator
  • Hero Member
  • *
  • Posts: 19487
    • GillespieRifles
Re: The life of an apprentice.
« Reply #13 on: November 16, 2018, 03:01:51 AM »
Quote from: Mike Brooks on November 16, 2018, 12:07:13 AM
That really fills me with confidence...... ???

Don't worry Mike, nothing a little Rustoleum and a few whacks with a chain won't fix ;D
Dennis
Logged
"I never considered a difference of opinion in politics, in religion, in philosophy, as cause for withdrawing from a friend" - Thomas Jefferson

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15846
Re: The life of an apprentice.
« Reply #14 on: November 16, 2018, 04:19:58 AM »
Ahh - .38 - now that's an interesting calibre.
Balls are no problem as there are lots of .375" RB moulds available, as well as swaged ones made for the .36 Navy & other revolvers.
« Last Edit: November 16, 2018, 04:22:07 AM by Daryl »
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: The life of an apprentice.
« Reply #15 on: November 16, 2018, 04:54:05 PM »
Quote from: Daryl on November 16, 2018, 04:19:58 AM
Ahh - .38 - now that's an interesting calibre.
Balls are no problem as there are lots of .375" RB moulds available, as well as swaged ones made for the .36 Navy & other revolvers.
That was what I was after, using the Colt's Navy revolver ball. Hoyt reamed it a bit more so I could use a ,.020 patch. I think the actual caliber is officially 38 1/2, but that's just too silly to say. ;D
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3702
Re: The life of an apprentice.
« Reply #16 on: November 16, 2018, 08:48:03 PM »
"Don't worry Mike, nothing a little Rustoleum and a few whacks with a chain won't fix
Dennis"

 ;D   Hah!   Well said. 
Logged

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: The life of an apprentice.
« Reply #17 on: November 16, 2018, 08:56:29 PM »
Round it off on the large end Mike.....39 cal.  That'll make guys scratch their heads.

Ed Rayl cut my .25 cal barrel .255" or 25 1/2.  I'll call it a .26 cal just to get the same reaction.
« Last Edit: November 16, 2018, 08:57:50 PM by D. Taylor Sapergia »
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.
Pages: [1]   Go Up
« previous next »