« previous next »
Pages: [1]   Go Down

Author Topic: Should I be concerned  (Read 1613 times)

Offline Scota4570

  • Hero Member
  • *****
  • Posts: 2393
Should I be concerned
« on: June 20, 2020, 08:28:03 PM »
That they used two different alloys? If the lid patinas to a different color than the rest I will not use it.


Logged

Offline hanshi

  • Hero Member
  • *****
  • Posts: 5335
  • My passion is longrifles!
    • martialartsusa.com
Re: Should I be concerned
« Reply #1 on: June 20, 2020, 10:05:56 PM »
I might still use it but it really depends on how the color differs.  Big difference; no way.
Logged
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.

Offline Stophel

  • Hero Member
  • *****
  • Posts: 4532
  • Chris Immel
Re: Should I be concerned
« Reply #2 on: June 20, 2020, 10:48:33 PM »
sand/polish the parts off a little bit first and see if there's a color difference.  Then do a test of whatever patina you want to do before you inlet it into the stock.
Logged
When a reenactor says "They didn't write everything down"   what that really means is: "I'm too lazy to look for documentation."

Offline BOB HILL

  • Hero Member
  • *****
  • Posts: 2281
Re: Should I be concerned
« Reply #3 on: June 21, 2020, 02:48:08 AM »
what Stophel said
Bob
Logged
South Carolina Lowcountry

Online Bill Raby

  • Hero Member
  • *****
  • Posts: 1543
Re: Should I be concerned
« Reply #4 on: June 21, 2020, 03:26:53 AM »
Stophel is right. Looks like it might just be a different surface texture on the two pieces. That can make them look different. Sand them down to see what you have.
Logged

Offline Scota4570

  • Hero Member
  • *****
  • Posts: 2393
Re: Should I be concerned
« Reply #5 on: June 21, 2020, 03:51:47 AM »
It seems OK.  I went ahead and used it.  I am getting to the point on this project that a minor issue will not keep me up at night. There are a couple of minor inletting issue that I can hide.   
 



Logged

Offline redheart

  • Hero Member
  • *****
  • Posts: 599
Re: Should I be concerned
« Reply #6 on: June 21, 2020, 07:15:54 PM »
Looks great! :)
Logged
Pages: [1]   Go Up
« previous next »