« previous next »
Pages: [1]   Go Down

Author Topic: Carving  (Read 6012 times)

Gunn

  • Guest
Carving
« on: April 09, 2011, 07:41:38 PM »
I would like to know if there are any books out there that show the basic fundamentals of stock carving?  I can't at this time afford to go to one of the seminars.  So, I figure if there are books that might help, get me started in the right direction.  Thanks in advance.  Gunn
Logged

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7907
Re: Carving
« Reply #1 on: April 09, 2011, 07:45:35 PM »
Gunn: Lots of books and vidieos too. Books  from Dixons, Shumway and others plus vidieos from Brooks, Dangler, and American Pioner vidieo just to name a few.
Logged

Offline Blacksmoke

  • Hero Member
  • *****
  • Posts: 868
  • "Old age and treachery beats youth and skill"
Re: Carving
« Reply #2 on: April 09, 2011, 08:26:07 PM »
"Recreating The American Longrifle"  by; Buchele, Alexander and Shumway.  Available from TOW - Track of The Wolf.     Highly recommended by:  Hugh Toenjes
Logged
H.T.

Offline Ky-Flinter

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7496
  • Born in Kentucke, just 250 years late
Re: Carving
« Reply #3 on: April 09, 2011, 08:28:57 PM »
Hi ya Gunn, welcome to ALR.

There is a very good tutorial on Relief Carving right here on this site.  http://americanlongrifles.org/forum/index.php?topic=12.0

And there are tutorials on tool sharpening and carving on the old Archive ALR site.

Hope this helps.

-Ron
« Last Edit: April 09, 2011, 08:40:36 PM by Ky-Flinter »
Logged
Ron Winfield

Life is too short to hunt with an ugly gun. -Nate McKenzie

Offline Lucky R A

  • Hero Member
  • *****
  • Posts: 1628
  • In Costume
Re: Carving
« Reply #4 on: April 09, 2011, 08:32:52 PM »
Gunsmiths Tips & Projects by Wolf Publishing is a great book for less than $20.00.  It has a whole series of articles written by John Bivins and others.  It specifically covers carving in the Bivins style, but there is so much more.  I can not recommend it highly enough.
Logged
"The highest reward that God gives us for good work is the ability to do better work."  - Elbert Hubbard

Offline LRB

  • Hero Member
  • *****
  • Posts: 1567
    • WICK ELLERBE
Re: Carving
« Reply #5 on: April 09, 2011, 09:30:07 PM »
  Plus 1 on that book.
Logged

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: Carving
« Reply #6 on: April 09, 2011, 10:04:25 PM »
Logged

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Carving
« Reply #7 on: April 09, 2011, 10:05:46 PM »
I agree with Ron on the Bivins articles.  As a resident of the west coast, John was my first mentor via Rifle magazine.  A lot of good articles were written by him and it is a blessing that they are captured as a group in the Gunsmiths Tips and Projects book.
DMR
Logged

California Kid

  • Guest
Re: Carving
« Reply #8 on: April 09, 2011, 10:27:49 PM »
Too bad its out of print, but Wolfe does have an updated, revised edition on their website now though.
I don't know if John's articles are still in it or not. Does anybody know?
There is also a book titled Manual of Traditional Wood Carving, a reprint from Dover that is very helpful. Not
specifically gun carving, but still the same technique.
Logged

Offline J. Talbert

  • Hero Member
  • *****
  • Posts: 2309
Re: Carving
« Reply #9 on: April 09, 2011, 10:49:48 PM »
Gary Brumfield has an excellent powerpoint presentation on his website here:
http://www.flintriflesmith.com/ToolsandTechniques/tools_and_techniques.htm

Jeff
Logged
There are no solutions.  There are only trade-offs.”
Thomas Sowell

Offline Ed Wenger

  • Global Moderator
  • Hero Member
  • *
  • Posts: 2457
Re: Carving
« Reply #10 on: April 10, 2011, 02:59:18 AM »
All excellent suggestions.  I would add David Price's book on carving.  It's not inexpensive, but has excellent photos and descriptions.  I found it to be very useful when I was first starting to carve.

               Ed
Logged
Ed Wenger

Offline Dave B

  • Hero Member
  • *****
  • Posts: 3132
Re: Carving
« Reply #11 on: April 10, 2011, 03:57:29 AM »
Here is a link for the Gunsmithing tips and Projects first edition used  The new second edition is $40.  I can vouch for the first one as being worth the investment.

http://www.amazon.com/gp/offer-listing/0935632816/ref=dp_olp_used?ie=UTF8&condition=used
Logged
Dave Blaisdell

Offline James

  • Hero Member
  • *****
  • Posts: 627
Re: Carving
« Reply #12 on: April 18, 2011, 05:08:19 AM »
Thanks for pointing in the direction of Bivins articles in the Gunsmithing Tips book. Got a used copy the other day and have learned much already.
Logged
"Guard with jealous attention the public liberty. Suspect everyone who approaches that jewel. Unfortunately, nothing will preserve it but downright force. Whenever you give up that force, you are ruined... The great object is that every man be armed. Everyone who is able might have a gun." P.Henry

Offline Swampwalker

  • Sr. Member
  • ****
  • Posts: 387
Re: Carving
« Reply #13 on: April 18, 2011, 05:29:36 PM »
Gunn - a stong second (or third?) on Biven's articles in 'Gunsmithing Tips..'.  Biven's was not only a great artist and scholar of the longrifle, he was (I think) the best writer on the topic.  His articles, and the book has many, not just on carving, are a real pleasure to read and reread.
Logged
Pages: [1]   Go Up
« previous next »