« previous next »
Pages: [1]   Go Down

Author Topic: Applied tip horn finished  (Read 5812 times)

Offline Carl Dumke

  • Full Member
  • ***
  • Posts: 123
Applied tip horn finished
« on: January 15, 2011, 09:54:34 PM »
Just finished an applied tiphorn.  It measures about 13 inches with a dark-stained cherry plug with a dark horn band and aged brass tack in the end.  The tip is turned tan horn dyed dark brown and measures about 1.5 inches.  The staple is steel wire.  I used a wash of golden yellow Rit dye on the main body getting darker towards the tip.




Logged
Carl

Offline Beaverman

  • Hero Member
  • *****
  • Posts: 569
Re: Applied tip horn finished
« Reply #1 on: January 15, 2011, 10:06:09 PM »
Nicely executed!
Logged

Offline B. Hey

  • Sr. Member
  • ****
  • Posts: 290
Re: Applied tip horn finished
« Reply #2 on: January 16, 2011, 07:02:46 AM »
Nice work Carl. Thanks for sharing.
Logged

Offline whitebear

  • Hero Member
  • *****
  • Posts: 837
Re: Applied tip horn finished
« Reply #3 on: January 16, 2011, 07:32:19 AM »
Beautiful horn Carl and welcome to the forum.
Logged
In the beginning God...
Georgia - God's vacation spot

Offline wattlebuster

  • Hero Member
  • *****
  • Posts: 2088
Re: Applied tip horn finished
« Reply #4 on: January 16, 2011, 06:13:18 PM »
Excellent work :)
Logged
Nothing beats the feel of a handmade southern iron mounted flintlock on a cold frosty morning

Offline Don Getz

  • Hero Member
  • *****
  • Posts: 6853
Re: Applied tip horn finished
« Reply #5 on: January 16, 2011, 06:55:22 PM »
Carl.....nice horn, I love the simplicity, nice coloration.............Don
Logged

Macon Due

  • Guest
Re: Applied tip horn finished
« Reply #6 on: January 16, 2011, 07:15:00 PM »
Carl
Boy......that is nice. I like the look of them with the slight antiquing.I have a question though......how do you guys secure the staple in the horn?
Thanks......Macon
Logged

Offline Carl Dumke

  • Full Member
  • ***
  • Posts: 123
Re: Applied tip horn finished
« Reply #7 on: January 16, 2011, 08:47:04 PM »
Quote from: Macon Due on January 16, 2011, 07:15:00 PM
Carl
Boy......that is nice. I like the look of them with the slight antiquing.I have a question though......how do you guys secure the staple in the horn?
Thanks......Macon

The staple is shaped with wire, then you have to compare the length of the staple so that, when you insert the ends, it protrudes into the spout hole about 3/4 of the way.  Then you take a 1/4" rod or old sawed off screw driver, put it in the spout and lightly hammer the ends back--done!  Hope that makes sense...
Logged
Carl

Offline hanshi

  • Hero Member
  • *****
  • Posts: 5335
  • My passion is longrifles!
    • martialartsusa.com
Re: Applied tip horn finished
« Reply #8 on: January 16, 2011, 09:10:40 PM »
Very good work.
Logged
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.

Macon Due

  • Guest
Re: Applied tip horn finished
« Reply #9 on: January 16, 2011, 09:20:07 PM »
Carl
In otherwords just 'clinch' it over? [like if you would clinch a nail over from the inside of the board.] No glue or sealer used?
Thanks Macon
Logged

Offline Carl Dumke

  • Full Member
  • ***
  • Posts: 123
Re: Applied tip horn finished
« Reply #10 on: January 17, 2011, 01:04:13 AM »
Quote from: Macon Due on January 16, 2011, 09:20:07 PM
Carl
In otherwords just 'clinch' it over? [like if you would clinch a nail over from the inside of the board.] No glue or sealer used?
Thanks Macon

Macon,
Yes, exactly--just like bending over the end of the nail.  No glue or sealer.
Logged
Carl

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18391
  • AKA TimBuckII
Re: Applied tip horn finished
« Reply #11 on: January 17, 2011, 01:24:12 AM »
 Looks good. In the pic is part of the tip the stopper? If so do you have one with the stopper removed? The color is great, as is the turning on the base and band.

 Tim C.
Logged

Offline Carl Dumke

  • Full Member
  • ***
  • Posts: 123
Re: Applied tip horn finished
« Reply #12 on: January 17, 2011, 01:45:41 AM »
Quote from: Tim Crosby on January 17, 2011, 01:24:12 AM
Looks good. In the pic is part of the tip the stopper? If so do you have one with the stopper removed? The color is great, as is the turning on the base and band.

 Tim C.

Tim,
The tip does not yet have a stopper--somehow I like the look of horns without them.  I will have to work on one in the near future...

Carl
Logged
Carl

Offline A.Merrill

  • Hero Member
  • *****
  • Posts: 797
Re: Applied tip horn finished
« Reply #13 on: January 18, 2011, 11:37:43 AM »
    The brass tip is a nice touch.....AL
Logged
Alan K. Merrill
Pages: [1]   Go Up
« previous next »