Author Topic: Hash fowling piece--blog  (Read 6684 times)

Offline Kermit

  • Hero Member
  • *****
  • Posts: 3099
Hash fowling piece--blog
« on: January 21, 2011, 09:09:42 PM »
Very nice. I am curious about the front sight and how that was done. Anyone know?
"Anything worth doing is worth doing slowly." Mae West

Offline Greg S Day

  • Full Member
  • ***
  • Posts: 104
Re: Hash fowling piece--blog
« Reply #1 on: January 21, 2011, 09:26:42 PM »
That is a soldered on sight.  Track sells them.  Looks like he filed/sanded most of the base away.

It is a X shaped base.  I left more of the silver X show on my gun.
He Conquers Who Endures

Offline Kermit

  • Hero Member
  • *****
  • Posts: 3099
Re: Hash fowling piece--blog
« Reply #2 on: January 21, 2011, 09:43:19 PM »
I'm seeing the "X" as much larger than that. Something else is going on here, methinks. ???
"Anything worth doing is worth doing slowly." Mae West

Offline James Rogers

  • Hero Member
  • *****
  • Posts: 3164
  • James Rogers
    • Fowling Piece
Re: Hash fowling piece--blog
« Reply #3 on: January 21, 2011, 10:50:56 PM »
That is a soldered on sight.  Track sells them.  Looks like he filed/sanded most of the base away.

It is a X shaped base.  I left more of the silver X show on my gun.
Not sure if you are kidding but in  case you're not, it's an English spider type and the silver is inlaid in the barrel. Jim made everything on the gun except the lock.  I know the CA Kid has done one and maybe he can detail the procedure.

Offline Greg S Day

  • Full Member
  • ***
  • Posts: 104
Re: Hash fowling piece--blog
« Reply #4 on: January 21, 2011, 11:16:04 PM »
Sorry guys.  My earlier comment didn't read to good.

I meant that Track sells a cast version of that type of sight.  It can be soldered onto the barrel.

I don't know how your builder may have gone about it.

Here is a much clumsier approach to the same type of sight.



Greg
He Conquers Who Endures

Offline bigbat

  • Sr. Member
  • ****
  • Posts: 383
Re: Hash fowling piece--blog
« Reply #5 on: January 22, 2011, 06:54:21 PM »
Jim even cast the thumb piece, its the Sibley coat of arms

California Kid

  • Guest
Re: Hash fowling piece--blog
« Reply #6 on: January 22, 2011, 09:11:35 PM »
Here is a pic of the front sight James is talking about. It's brass and a little different than Jim's, but the same idea.


California Kid

  • Guest
Re: Hash fowling piece--blog
« Reply #7 on: January 22, 2011, 09:32:25 PM »
Here's an original of the same type.


Offline James Rogers

  • Hero Member
  • *****
  • Posts: 3164
  • James Rogers
    • Fowling Piece
Re: Hash fowling piece--blog
« Reply #8 on: January 22, 2011, 10:46:35 PM »
Jim even cast the thumb piece, its the Sibley coat of arms
Scott, I believe he actually sculpted and chased the thumbpiece.

California Kid

  • Guest
Re: Hash fowling piece--blog
« Reply #9 on: January 23, 2011, 01:19:30 AM »
Just talked to Jim and he said the thumb piece was cast from coin silver then rolled into sheet. The coat of arms was then chisled and engraved as James said. The only thing he didn't make is the lock. Barrel is a blank that was bored by Don Getz. Jim did the outside profile himself. He made the breech as well. If you study the breech it can be seen that it is a quite complex profile.

Offline bigbat

  • Sr. Member
  • ****
  • Posts: 383
Re: Hash fowling piece--blog
« Reply #10 on: January 23, 2011, 06:22:19 PM »
It was delightful, sorry I sold it, very sorry

Offline James Rogers

  • Hero Member
  • *****
  • Posts: 3164
  • James Rogers
    • Fowling Piece
Re: Hash fowling piece--blog
« Reply #11 on: January 23, 2011, 07:39:35 PM »
It was delightful, sorry I sold it, very sorry
I have had the gun here for a week and can understand your feelings above.  It is a wonderful piece. This is the only Hash gun known to have been sold by the original owner. Any others were disbursed by the widows.