Author Topic: Building a Flintlock Duell Pistol (Read 45372 times)

D. Taylor Sapergia · « **Reply #50 on:** February 15, 2012, 01:42:07 AM »

Runestav...that looks much better. If I may add, I would like to see a little more wood come off the bottom of the forearm too. You don't need more than 3/32" of wood below the rod hole, so if you can, I'd like to see you reduce that wood. Overall, it's looking very nice.
I disagree regarding the critique on the trigger placement. Runestav is saying his trigger pull is a little over 2 pounds...how much lighter do you want a dueling pistol, or a target pistol, for that matter? And moving the trigger back would change the architecture for the worse. No...it's just fine.
Nice work Runy!

Dphariss · « **Reply #51 on:** February 15, 2012, 08:47:42 AM »

Ditto Taylor.

The trigger location is fine.
Doubly so since it has a very light trigger.

Dan

Old Ford2 · « **Reply #52 on:** February 15, 2012, 02:16:25 PM »

Great work!
Love the trigger guard. I like also your choice of materials to make the trigger guard & trigger plate. Great thinking & recycling of materials.
Certainly saves work using old pipe to make trigger guard bow.
Keep the great gun making comming
I can send you a rusty " Old Ford " for more parts.
Fred

runastav · « **Reply #53 on:** February 16, 2012, 07:09:53 PM »

Hey guys and thank you!
Enter thimbles made, and litle wood off forestock Tayler

Yesss Old Ford send me a rusty old ford heheee

Runar

Jim Kibler · « **Reply #54 on:** February 16, 2012, 07:12:20 PM »

It's looking good Runar. That's a nice entry pipe you made. Thanks for posting photos of your progress.

Jim

D. Taylor Sapergia · « **Reply #55 on:** February 16, 2012, 08:13:11 PM »

Runar....that's looking very nice. Now your profile sis much better. Great entry pipe! They're fun to make, eh?

multifasciatus · « **Reply #56 on:** February 16, 2012, 10:53:20 PM »

Quote from: Old Ford2 on February 15, 2012, 02:16:25 PM

Great work!
Love the trigger guard. I like also your choice of materials to make the trigger guard & trigger plate. Great thinking & recycling of materials.
Certainly saves work using old pipe to make trigger guard bow.
Keep the great gun making comming
I can send you a rusty " Old Ford " for more parts.
Fred

I have the pleasure to visit (and get help from)runastav,
he truly is a recycling kinda guy.
Great work runastav!!

runastav · « **Reply #57 on:** February 19, 2012, 12:43:34 PM »

Hey, and thank you guys!
Underlug, wedge key and slotted oval inlays made. Ovals made from a coin, sorry King Harald

Runar

Frontfastening lock, ask pro screw or nails for oval inlays?

Same patent on this Swedish 1860 Wredes rifle

runastav · « **Reply #58 on:** February 25, 2012, 05:41:02 PM »

Hey guys!
Little duellpistolbuilding, and the reason you see in photo ;)Buy me a Colt 1860, and it was in baaaad shape I have made 5 new screws, mainspring etc :)But now it is in working order, maby I can shoot it but the cylinder is heavy rusted inside :(Sorry adm for off topic talk

Well, the fronsight is ready for shooting inn
Runar

dogcreek · « **Reply #59 on:** February 25, 2012, 07:46:00 PM »

Runastav, it's been fascinating and educational to watch you build this pistol. You're a true craftsman. Thank you for sharing.

runastav · « **Reply #60 on:** March 01, 2012, 01:49:31 PM »

Hey Folks!
Thank you dogcreek

The pistol begin take shape
Runar

The Colt 1860 cowboy dueller insisted be on photo with the English dueller hehe

Dr. Tim-Boone · « **Reply #61 on:** March 02, 2012, 04:46:29 AM »

Very nice!! You do wonderful work. I appreciate you sharing the building process with us!

Dave B · « **Reply #62 on:** March 04, 2012, 08:15:22 AM »

Runar,
Well done in all respects. Thankyou for walking us through your build. It is always interesting to see how others approach a project and the steps to get it done.
I am certain that this will be moved over to the tutorial section of the site.

runastav · « **Reply #63 on:** March 04, 2012, 10:16:19 PM »

Thank you Dr.Tim-Boone and Dave B!
So it is time to fix the patent Breeching. The powder chamber is drilled 8mm, and it vill take 19grs 3F perfekt for me. Krossdrilled and tap 1/4-28" stainless plug counterbored 3mm and flash hole 1,5mm. Access hole filled with stainless screw. See photo it is easy metalwork

Runar

Powder Chamber take 19 grs 3 F

Rasch Chronicles · « **Reply #64 on:** March 07, 2012, 03:36:26 AM »

Thanks for sharing the build! I learn something new with every post!

Regards,
Albert A Rasch
The Rasch Outdoor Chronicles
Best Boar Hunting Calibers!