« previous next »
Pages: [1]   Go Down

Author Topic: Tapered Touch Hole Reamer  (Read 6338 times)

Offline runastav

  • Hero Member
  • *****
  • Posts: 1152
Tapered Touch Hole Reamer
« on: August 19, 2013, 10:55:03 PM »
Hi Folks!
In Muzzle Blasts  May 2013  I read with interest Ask the Master by Jack Brooks. He made a tapered touch hole reamer for thick walled barrels. So I made me one, and it works very vell on a Pedersoli Brown Bess cal 75  and my cal 66 snap lock ;)
Runar






« Last Edit: January 14, 2020, 06:29:58 AM by rich pierce »
Logged

Offline alyce-james

  • Hero Member
  • *****
  • Posts: 909
Re: Tapered Touch Hole Reamer
« Reply #1 on: August 20, 2013, 12:54:45 AM »
Good day Runar; I know the depth the reamer is inserted the larger the hole becomes. When the touch hole on your Brown Bess was completed, what was the smallest diameter at the inside wall ?? Thanks, AJ
« Last Edit: August 20, 2013, 04:38:47 AM by alyce-james »
Logged
"Candy is Dandy but Liquor is Quicker". by Poet Ogden Nash 1931.

Offline runastav

  • Hero Member
  • *****
  • Posts: 1152
Re: Tapered Touch Hole Reamer
« Reply #2 on: August 20, 2013, 04:08:34 PM »
Hi alyce-james!
Same as I bore it up years ago to 2,5mm maby you think it is to big but it works nice ;) 2,5mm is ca 3/32" ???
Runar
« Last Edit: January 14, 2020, 06:30:53 AM by rich pierce »
Logged

Offline alyce-james

  • Hero Member
  • *****
  • Posts: 909
Re: Tapered Touch Hole Reamer
« Reply #3 on: August 20, 2013, 05:42:04 PM »
Runar; Hello again. Thanks for your fast reply. AJ
Logged
"Candy is Dandy but Liquor is Quicker". by Poet Ogden Nash 1931.

Jeger Justnes

  • Guest
Re: Tapered Touch Hole Reamer
« Reply #4 on: August 31, 2013, 10:20:26 AM »
Nice one, Runar!
And as always -very informative and richly illustrated. I like that a whole lot :-)
Best regards
Tor
Logged
Pages: [1]   Go Up
« previous next »