Author Topic: mainspring vise plans  (Read 10574 times)

Offline al56

  • Jr. Member
  • **
  • Posts: 64
mainspring vise plans
« on: October 23, 2014, 11:41:44 PM »
Here are the plans
http://charlescityhs.sharpschool.net/UserFiles/Servers/Server_983388/File/Nielsen/mainspring%20vise.pdf
This should allow you to open the page with the prints on them.  If you are unable to open them, please email me at anielsen@mchsi.com or anielse@charlescityschools.org

Offline Kermit

  • Hero Member
  • *****
  • Posts: 3099
Re: mainspring vise plans
« Reply #1 on: October 24, 2014, 05:45:55 AM »
Cool. Popped right open for me. Thank your draftsman for us.  ;)
"Anything worth doing is worth doing slowly." Mae West

tuffy

  • Guest
Re: mainspring vise plans
« Reply #2 on: October 24, 2014, 01:23:38 PM »
Thank you, Al. No problems here. Worked great.  :)

                  CW

Offline alyce-james

  • Hero Member
  • *****
  • Posts: 908
Re: mainspring vise plans
« Reply #3 on: October 24, 2014, 04:34:29 PM »
Good morning al56; Sir, Thank you for the "Main Spring Vice" drawings. Copies printed and in my work binder. Have a great coming week end. AJ
« Last Edit: October 24, 2014, 04:36:00 PM by alyce-james »
"Candy is Dandy but Liquor is Quicker". by Poet Ogden Nash 1931.

Offline JBJ

  • Hero Member
  • *****
  • Posts: 579
Re: mainspring vise plans
« Reply #4 on: October 24, 2014, 05:45:37 PM »
Many thanks!
J.B.

Offline gunmaker

  • Hero Member
  • *****
  • Posts: 691
  • the old dog gunmaker
Re: mainspring vise plans
« Reply #5 on: October 24, 2014, 08:24:36 PM »
Ditto----- ;)   Autocad ?

Offline Ray Barbarow

  • Starting Member
  • *
  • Posts: 36
Re: mainspring vise plans
« Reply #6 on: October 25, 2014, 02:44:35 AM »
Thank you!!!!
Ray

John A. Stein

  • Guest
Re: mainspring vise plans
« Reply #7 on: October 25, 2014, 03:45:05 AM »
Thank you and your class. John

Offline WadePatton

  • Hero Member
  • *****
  • Posts: 5274
  • Tennessee
Re: mainspring vise plans
« Reply #8 on: October 25, 2014, 05:12:32 AM »
ooh, so graphic!

 :o




me like, thanks.  ;)
Hold to the Wind

KevinL

  • Guest
Re: mainspring vise plans
« Reply #9 on: October 27, 2014, 04:36:56 AM »
Thanks Al.  Now send me some more of your students.  ;-)  Sorry I missed you when you brought your students over for Manufacturing Day, would have much rather been there than in Detroit for training. 
« Last Edit: October 27, 2014, 04:44:43 AM by KevinL »

Hessian

  • Guest
Re: mainspring vise plans
« Reply #10 on: October 27, 2014, 08:42:21 PM »
Thanks!

AZshooter

  • Guest
Re: mainspring vise plans
« Reply #11 on: November 23, 2014, 09:10:44 AM »
Thanks Al.  Now send me some more of your students.  ;-)  Sorry I missed you when you brought your students over for Manufacturing Day, would have much rather been there than in Detroit for training. 

Check with Cass Tech in Detroit.  They should have one or two students able to do it for you.

My Grandfather taught at Cass after he was discharged from flight school as an instructor at the end of WWI.  He came from several generations of foundrymen, and taught foundry, math, drafting, & patternmaking at the original campus long ago where the iron foundry was up on the 5th floor...