« previous next »
Pages: [1]   Go Down

Author Topic: Grinder make-over from Bob Roller  (Read 40489 times)

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Grinder make-over from Bob Roller
« on: October 17, 2015, 08:48:18 PM »
  A while ago, Bob sent me these images of an adaptation he made for a bench grinder.  I hope he'll see this and comment.






« Last Edit: January 14, 2020, 03:39:52 AM by rich pierce »
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9687
Re: Grinder make-over from Bob Roller
« Reply #1 on: October 18, 2015, 04:01:21 AM »
It's a rainy afternoon project I call my final descent into madness.
In reality I thought a multi use grinder would be an idea someone without
a lot of room or money for motors and mandrels could use. I am NOT going to make
these to sell but if anyone wants to use the idea,go for it. The Jacobs chuck was an
after thought. This grinder is a 40 year old Rockwell and the shafts from the motor
are 1/2x20 left and right. The shafts were made from one inch hexagon 1018 that
I had from a long forgotten project and I also made the special nuts from it.
This thing runs smooth and takes a while to unwind when the power is turned off
but that's not a problem.
Thanks again to Taylor for his help in getting this idea on the forum if for no other reason
than a laugh.

Bob Roller
Logged

Offline Old Ford2

  • Hero Member
  • *****
  • Posts: 1102
Re: Grinder make-over from Bob Roller
« Reply #2 on: October 18, 2015, 03:38:28 PM »
Great idea!
Things must get a little hectic, when the c clamps come loose  :o  ;D
Have a great day! Eh?
Fred
Logged
Never surrender, always take a few with you.
Let the Lord pick the good from the bad!

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9687
Re: Grinder make-over from Bob Roller
« Reply #3 on: October 18, 2015, 03:55:52 PM »
Quote from: Old Ford2 on October 18, 2015, 03:38:28 PM
Great idea!
Things must get a little hectic, when the c clamps come loose  :o  ;D
Have a great day! Eh?
Fred

No clamps have ever come loose unless I loosen them. This thing runs smooth
and makes a good work station for grinding AND polishing.

Bob Roller
Logged

Offline Joe S.

  • Hero Member
  • *****
  • Posts: 1990
  • the other Joe S.
Re: Grinder make-over from Bob Roller
« Reply #4 on: October 18, 2015, 06:24:12 PM »
Great idea,one stop shopping,no need for multi-grinders or wheel changes.
Logged

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9687
Re: Grinder make-over from Bob Roller
« Reply #5 on: October 18, 2015, 07:33:18 PM »
Quote from: Joe S. on October 18, 2015, 06:24:12 PM
Great idea,one stop shopping,no need for multi-grinders or wheel changes.

Joe S,
Thanks for the endorsement of my multi tasking grinder.
As I said earlier,anyone that wants to use this idea or come up with improvements
on it then go for it. This one is a cobbled up thing but it works and works well for me.

Bob Roller
Logged

Offline longcruise

  • Hero Member
  • *****
  • Posts: 1839
  • Arvada, Colorado
Re: Grinder make-over from Bob Roller
« Reply #6 on: October 19, 2015, 08:28:20 PM »
It will make Red Green envious for sure!
Logged
Mike Lee

Offline T*O*F

  • Hero Member
  • *****
  • Posts: 5121
Re: Grinder make-over from Bob Roller
« Reply #7 on: October 19, 2015, 09:16:38 PM »
Quote
The shafts were made from one inch hexagon 1018
Looks like a good use for all those rusty Spanish barrels everyone has laying around.
Logged
Dave Kanger

If religion is opium for the masses, the internet is a crack, pixel-huffing orgy that deafens the brain, numbs the senses and scrambles our peer list to include every anonymous loser, twisted deviant, and freak as well as people we normally wouldn't give the time of day.
-S.M. Tomlinson

Offline shifty

  • Sr. Member
  • ****
  • Posts: 429
Re: Grinder make-over from Bob Roller
« Reply #8 on: December 04, 2015, 12:59:43 AM »
  Can't watch Red Green here anymore!
Logged

Offline Old Ford2

  • Hero Member
  • *****
  • Posts: 1102
Re: Grinder make-over from Bob Roller
« Reply #9 on: December 15, 2015, 02:46:50 PM »
Quote from: shifty on December 04, 2015, 12:59:43 AM
  Can't watch Red Green here anymore!
Wife won't let you???
Fred
Logged
Never surrender, always take a few with you.
Let the Lord pick the good from the bad!

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9687
Re: Grinder make-over from Bob Roller
« Reply #10 on: December 15, 2015, 03:09:34 PM »
Quote from: Old Ford2 on December 15, 2015, 02:46:50 PM
Quote from: shifty on December 04, 2015, 12:59:43 AM
  Can't watch Red Green here anymore!
Wife won't let you???
Fred

I have never watched Red Green and am wondering what my grinder/polisher idea has to do with him.
Can someone please enlighten me????

Bob Roller
Logged

Offline WadePatton

  • Hero Member
  • *****
  • Posts: 5303
  • Tennessee
Re: Grinder make-over from Bob Roller
« Reply #11 on: December 15, 2015, 04:57:19 PM »
Quote from: Bob Roller on December 15, 2015, 03:09:34 PM
Quote from: Old Ford2 on December 15, 2015, 02:46:50 PM
Quote from: shifty on December 04, 2015, 12:59:43 AM
  Can't watch Red Green here anymore!
Wife won't let you???
Fred

I have never watched Red Green and am wondering what my grinder/polisher idea has to do with him.
Can someone please enlighten me????


Bob Roller

Red Green is a comedic representation of a DIY'er or handy-man who always falls back on duct tape as his major method of construction.  Dial some up on the youtube.
Logged
Hold to the Wind

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9687
Re: Grinder make-over from Bob Roller
« Reply #12 on: December 15, 2015, 05:06:58 PM »
Quote from: WadePatton on December 15, 2015, 04:57:19 PM
Quote from: Bob Roller on December 15, 2015, 03:09:34 PM
Quote from: Old Ford2 on December 15, 2015, 02:46:50 PM
Quote from: shifty on December 04, 2015, 12:59:43 AM
  Can't watch Red Green here anymore!
Wife won't let you???
Fred

I have never watched Red Green and am wondering what my grinder/polisher idea has to do with him.
Can someone please enlighten me????


Bob Roller

Red Green is a comedic representation of a DIY'er or handy-man who always falls back on duct tape as his major method of construction.  Dial some up on the youtube.


Thanks but I'll pass on that one.

Bob Roller
Logged

Offline J Henry

  • Hero Member
  • *****
  • Posts: 685
Re: Grinder make-over from Bob Roller
« Reply #13 on: December 15, 2015, 06:59:17 PM »
  Bob,, Red Greens favorite saying is." If it ain't broken,,,you ain't trying hard enough"
 A true "Rube Goldberg"
Logged

ratfacedmcdougal

  • Guest
Re: Grinder make-over from Bob Roller
« Reply #14 on: December 15, 2015, 11:22:03 PM »
one of my favorite Red Green quotes " I am a man, I can change if I have to, I guess"
Logged

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9687
Re: Grinder make-over from Bob Roller
« Reply #15 on: December 15, 2015, 11:54:10 PM »
Quote from: J Henry on December 15, 2015, 06:59:17 PM
  Bob,, Red Greens favorite saying is." If it ain't broken,,,you ain't trying hard enough"
 A true "Rube Goldberg"

A true knucklehead IMHO.

Bob Roller
Logged

Offline gunmaker

  • Hero Member
  • *****
  • Posts: 691
  • the old dog gunmaker
Re: Grinder make-over from Bob Roller
« Reply #16 on: December 22, 2015, 03:30:34 AM »
Great idea, sort a along lines of a 6 band rock polisher set-up.  Unfortunately those ain't cheap....Tom
Logged

kaintuck

  • Guest
Re: Grinder make-over from Bob Roller
« Reply #17 on: February 21, 2016, 11:55:29 PM »
Looks like a feller could put a shoe polisher out on the end!,,😄
Logged
Pages: [1]   Go Up
« previous next »