Author Topic: vent pick advise please  (Read 3705 times)

Turtle

  • Guest
vent pick advise please
« on: January 08, 2016, 02:26:44 AM »
 I am going to build a southern rifle. I have put brass vent pick inlays on my rifles and want to have a gun mounted pick in this one. I think something else would be called for. Ideas?
                                                                Thanks,Rich

ricktull

  • Guest
Re: vent pick advise please
« Reply #1 on: January 08, 2016, 03:01:03 AM »
I'd use steel, or maybe more authentic would be a hole for a feather in rear of cheekpiece or in the toe area.

Offline L. Akers

  • Hero Member
  • *****
  • Posts: 509
Re: vent pick advise please
« Reply #2 on: January 08, 2016, 05:38:08 AM »
I have used 2 small iron staples set just under the cheek-piece to hold a feather.

Offline David R. Pennington

  • Hero Member
  • *****
  • Posts: 2928
Re: vent pick advise please
« Reply #3 on: January 08, 2016, 05:42:12 AM »
Just a couple plain iron staples driven in under cheek piece to hold clipped feather or a wire pick. Or hole drilled for a feather. I am very fond of feathers for clearing vents. They work about like a pipe cleaner, they are PC, won't damage the vent, and are free. (Doves leave them under the bird feeder for me).
VITA BREVIS- ARS LONGA

Offline Robby

  • Hero Member
  • *****
  • Posts: 2656
  • NYSSR ―
Re: vent pick advise please
« Reply #4 on: January 08, 2016, 03:59:54 PM »
Not sure if these pictures will help you turtle but they are the same general type rifles your talking about. The pins holding the pick are made from 1/16" diameter rod, filed flat to 1/32", bent around a piece, the diameter of the pick,  soldered and the hole reamed clean. I pilot drill the holes in the stock, rough up the shank of the pins with a sharp chisel and tap them in, I put the pick through the pin hole while tapping to prevent the hole from deforming.



Robby
molon labe
We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution. A. Lincoln

Offline WadePatton

  • Hero Member
  • *****
  • Posts: 5303
  • Tennessee
Re: vent pick advise please
« Reply #5 on: January 08, 2016, 05:05:15 PM »
I am fond of the feather and a hole.  During hunting season when I leave the gun loaded, a quill stays in the vent so long as there is a charge in the bbl and it can't do much damage to the vent or the cover or pan.

The forest is littered with feathers.
Hold to the Wind

Offline Dave Marsh

  • Hero Member
  • *****
  • Posts: 828
Re: vent pick advise please
« Reply #6 on: January 08, 2016, 05:59:07 PM »
I like the feather idea and would like to add one to my gun.  Anyone have pictures of the feather in its hole??

Thanks,

Dave
"Those who give up freedom for security deserve neither freedom nor security."
~ Benjamin Franklin

Offline Robby

  • Hero Member
  • *****
  • Posts: 2656
  • NYSSR ―
Re: vent pick advise please
« Reply #7 on: January 08, 2016, 07:14:21 PM »
Be careful of what kind of feather you use. It seems that most species have some kind of protection and possessing their parts is against federal law, and from what I have heard, they seem to enjoy enforcing this particularly onerous statute. Not starting anything, its just the way things are.
Robby

http://infinitespider.com/illegal-feathers-and-the-feather-atlas/
« Last Edit: January 08, 2016, 07:19:41 PM by Robby »
molon labe
We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution. A. Lincoln