Author Topic: Goes W/Pouring A Band/ A Fix  (Read 3869 times)

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18396
  • AKA TimBuckII
Goes W/Pouring A Band/ A Fix
« on: August 10, 2017, 04:29:31 PM »
 When I filed the band down I found a hole, so I decided to try something. Rolling out a snake of clay for a dam I formed it around the hole and pressed it down around the edges. I heated the Pewter a little longer hoping once the new hit the hole it would melt it and the two would bond better, it did. Once filed and sanded off it looks like a one time pour.
 I post this because I have read of folks getting voids in a nose cap pours and this may work as a repair.

  Tim C.




« Last Edit: January 14, 2020, 12:53:54 AM by rich pierce »

Offline acorn20

  • Hero Member
  • *****
  • Posts: 542
Re: Goes W/Pouring A Band/ A Fix
« Reply #1 on: August 12, 2017, 06:59:40 AM »
Tim, you'd make a good tinker!
Dan Akers

Offline Cory Joe Stewart

  • Hero Member
  • *****
  • Posts: 1863
    • My etsy shop
Re: Goes W/Pouring A Band/ A Fix
« Reply #2 on: August 12, 2017, 05:44:45 PM »
That trick will come in handy.