« previous next »
Pages: [1]   Go Down

Author Topic: Cleaning patch cutter  (Read 13562 times)

Offline Brian Jordan

  • Hero Member
  • *****
  • Posts: 548
  • Pennsylvania
Cleaning patch cutter
« on: April 30, 2009, 05:42:20 AM »
I have a friend I shoot with, ask me to make him a tool for cutting cleaning patches. He hands me a patch, and says "this is what I would like, can you make one?"

    The cleaning patch was 2.500" in diameter, and immediately I couldn't wait to make one since I knew it be cool looking  8) I will be giving him his tool this Sunday at a shoot. I hope he will be happy with it. I made one for myself also, and am very satisfied with how it works.

Here are a few pictures of one next too a .750 diameter patch cutting tool  :o


« Last Edit: January 14, 2020, 04:52:09 AM by rich pierce »
Logged
Elizabeth, PA

"No free man shall ever be debarred the use of arms"...Thomas Jefferson

Let's Go Brandon!

Offline davec2

  • Hero Member
  • *****
  • Posts: 2952
    • The Lucky Bag
Re: Cleaning patch cutter
« Reply #1 on: April 30, 2009, 06:44:08 AM »
Nicely done!  I love well made tools.  What type of steel did you use?  Heat treated?
Logged
"No man will be a sailor who has contrivance enough to get himself into a jail; for being in a ship is being in a jail, with the chance of being drowned... a man in a jail has more room, better food, and commonly better company."
Dr. Samuel Johnson, 1780

Offline Brian Jordan

  • Hero Member
  • *****
  • Posts: 548
  • Pennsylvania
Re: Cleaning patch cutter
« Reply #2 on: April 30, 2009, 07:15:15 AM »
Thanks Dave, The tool is made of A2 tool steel hardened, and tempered to 59 Rc. The end of the tool that is struck with a hammer is drawn back to 45 Rc. to prevent chipping if someone were to use the wrong hammer to run the tool.
Logged
Elizabeth, PA

"No free man shall ever be debarred the use of arms"...Thomas Jefferson

Let's Go Brandon!

Offline P.W.Berkuta

  • Hero Member
  • *****
  • Posts: 2213
Re: Cleaning patch cutter
« Reply #3 on: April 30, 2009, 09:52:09 PM »
Nice workmanship - and what a BIG A%% punch :o :o :o! I think I would have been a little intimidated turning that thing!
Logged
"The person who says it cannot be done should not interrupt the person who is doing it." - Chinese proverb

brokenflint

  • Guest
Re: Cleaning patch cutter
« Reply #4 on: May 01, 2009, 03:51:22 AM »
Melsdad   You can serve soup in the big'in  ;D  nice btw
Logged

Offline Brian Jordan

  • Hero Member
  • *****
  • Posts: 548
  • Pennsylvania
Re: Cleaning patch cutter
« Reply #5 on: May 01, 2009, 04:03:33 AM »
I bet it would hold a bottle of yuengling also ;D
Logged
Elizabeth, PA

"No free man shall ever be debarred the use of arms"...Thomas Jefferson

Let's Go Brandon!

msblacksmith

  • Guest
Re: Cleaning patch cutter
« Reply #6 on: May 03, 2009, 02:57:32 AM »
cool
Logged

J Shingler

  • Guest
Re: Cleaning patch cutter
« Reply #7 on: May 05, 2009, 06:00:26 PM »
Nice punch! I have one similar I bought at dixons years ago. One thing that is nice is to add a hole at the top so you can push out the patches with a pincil. I run mine on the slowest speed In a drill press with a block of wood below. Cuts about 8 thickness slick!
Logged

Offline C Wallingford

  • Hero Member
  • *****
  • Posts: 863
  • Northern Kentucky
    • CW Knives
Re: Cleaning patch cutter
« Reply #8 on: May 05, 2009, 06:34:34 PM »
I have made a couple out of old hole saw cutters. Grind the teeth off and sharpen it. Use it as Jeff described
Logged

Offline Brian Jordan

  • Hero Member
  • *****
  • Posts: 548
  • Pennsylvania
Re: Cleaning patch cutter
« Reply #9 on: May 05, 2009, 07:15:14 PM »
This baby won't fit in a drill press ;D The handle end is 1.375" in diameter. I cut through 10 layers easily with a solid smack from a dead blow hammer. I know I could cut through more, but that takes away from the fun of usin' it :D  I also won't have to worry about burning the temper out of the cutting edge using a hammer.
Logged
Elizabeth, PA

"No free man shall ever be debarred the use of arms"...Thomas Jefferson

Let's Go Brandon!

Offline Dphariss

  • Hero Member
  • *****
  • Posts: 9920
  • Kill a Commie for your Mommy
Re: Cleaning patch cutter
« Reply #10 on: May 06, 2009, 04:41:51 PM »
Very impressive workmanship.

While I can understand some shooters needing a precision cleaning patch cutter.
I tend to tear mine from a piece of diaper flannel.
Or cut them with a rotary fabric cutter.
My question is: What did the chunk of A-2 cost?
MSC gets over 300 bucks for a 2x36" round.

I would love to make a couple of cutters but can't get past the material cost of large diameter tool steel.
Best I can do is 4140 end of bar cut offs from a barrel maker.
Dan
Logged
He who dares not offend cannot be honest. Thomas Paine

J Shingler

  • Guest
Re: Cleaning patch cutter
« Reply #11 on: May 06, 2009, 07:29:41 PM »
I use a drywall square and rotery cutter to cut 2" square cotton flannel cleaning patches from Wal Mart. I do cut nice shooting patches from bulk ox yoke patch materal using a cutter similar to what melsdad has shown. Not nearly as nice though. Sure like to have one in 62 size. Mine is good for up to 54 cal.
Logged

Offline Brian Jordan

  • Hero Member
  • *****
  • Posts: 548
  • Pennsylvania
Re: Cleaning patch cutter
« Reply #12 on: May 06, 2009, 09:47:08 PM »
Quote from: J Shingler on May 06, 2009, 07:29:41 PM
Sure like to have one in 62 size. Mine is good for up to 54 cal.

I have a few 1.500" diameter if that will work for a .62 cal. if you are interested?

If not I can make whatever size you would like.
« Last Edit: May 06, 2009, 09:47:51 PM by melsdad »
Logged
Elizabeth, PA

"No free man shall ever be debarred the use of arms"...Thomas Jefferson

Let's Go Brandon!

J Shingler

  • Guest
Re: Cleaning patch cutter
« Reply #13 on: May 06, 2009, 10:59:03 PM »
Hey now we are talking! I will check tonight but that sounds just about right. Drop me a note on what you need for one if you would please. 
Logged

J Shingler

  • Guest
Re: Cleaning patch cutter
« Reply #14 on: May 07, 2009, 08:45:43 PM »
1 1/2" would be great.  Drops me a note if you are interested.
Jshingler1 at sbcglobal.net
Logged
Pages: [1]   Go Up
« previous next »