Author Topic: Chambers PA Fowler Build  (Read 4240 times)

Offline Hatchet-Jack

  • Full Member
  • ***
  • Posts: 171
Chambers PA Fowler Build
« on: September 26, 2021, 06:09:01 PM »
I haven't posted much on this board. I thought I'd start a thread showing the build I've been working on for a while. It's a Jim Chambers PA Fowler .62 Cal 20 gauge, maple stock. So far I have the Barrel installed, Trigger and Plate, Tang Bolt, Lock and Side Plate and Ramrod fitted. I'm working on inletting the Butt Plate now.

I'm still figuring out how to attach pics, so for now here's a few to try it out. If these work I'll add more:






« Last Edit: September 26, 2021, 08:42:55 PM by Hatchet-Jack »

Offline Hatchet-Jack

  • Full Member
  • ***
  • Posts: 171
Re: Chambers PA Fowler Build
« Reply #1 on: September 26, 2021, 06:11:59 PM »






« Last Edit: September 26, 2021, 08:00:30 PM by Hatchet-Jack »

Offline Hatchet-Jack

  • Full Member
  • ***
  • Posts: 171
Re: Chambers PA Fowler Build
« Reply #2 on: September 26, 2021, 06:17:40 PM »






« Last Edit: September 26, 2021, 08:44:07 PM by Hatchet-Jack »

Offline Hatchet-Jack

  • Full Member
  • ***
  • Posts: 171
Re: Chambers PA Fowler Build
« Reply #3 on: September 26, 2021, 06:20:15 PM »
Boy I sure these pictures are showing up!







« Last Edit: September 26, 2021, 08:02:36 PM by Hatchet-Jack »

Offline Hatchet-Jack

  • Full Member
  • ***
  • Posts: 171
Re: Chambers PA Fowler Build
« Reply #4 on: September 26, 2021, 06:22:46 PM »
These are pics of how I whittled the ramrod down and how I scraped the channel to clear the front lock bolt.









« Last Edit: September 26, 2021, 08:44:33 PM by Hatchet-Jack »

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Chambers PA Fowler Build
« Reply #5 on: September 26, 2021, 07:29:28 PM »
You need to crop and resize your pics to make them more easily viewable.
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Hatchet-Jack

  • Full Member
  • ***
  • Posts: 171
Re: Chambers PA Fowler Build
« Reply #6 on: September 26, 2021, 08:09:44 PM »
You need to crop and resize your pics to make them more easily viewable.
I sized them down. Hopefully it helped.

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15755
Re: Chambers PA Fowler Build
« Reply #7 on: September 26, 2021, 09:08:59 PM »
Look good to me. Welcome to the forum, HJ.
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline Hatchet-Jack

  • Full Member
  • ***
  • Posts: 171
Re: Chambers PA Fowler Build
« Reply #8 on: September 26, 2021, 10:15:31 PM »
Look good to me. Welcome to the forum, HJ.
Thank you!

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Chambers PA Fowler Build
« Reply #9 on: September 26, 2021, 11:22:34 PM »
You need to crop and resize your pics to make them more easily viewable.
I sized them down. Hopefully it helped.
Yep, perfect. looks like you're doing a great job.
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Hatchet-Jack

  • Full Member
  • ***
  • Posts: 171
Re: Chambers PA Fowler Build
« Reply #10 on: September 27, 2021, 12:12:47 AM »
You need to crop and resize your pics to make them more easily viewable.
I sized them down. Hopefully it helped.
Yep, perfect. looks like you're doing a great job.
Thanks Mike! I was a bit nervous posting my work on this board with so many talented builders.

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18363
  • AKA TimBuckII
Re: Chambers PA Fowler Build
« Reply #11 on: September 27, 2021, 12:50:23 AM »
 I like the use of the shears, that's thinking "Outside The Box". Keep'm com'n.

    Tim

Offline J. Talbert

  • Hero Member
  • *****
  • Posts: 2306
Re: Chambers PA Fowler Build
« Reply #12 on: September 27, 2021, 01:27:39 AM »
Looking great so far.
A number of nice options are available as Chambers kits.

Jeff
There are no solutions.  There are only trade-offs.”
Thomas Sowell

Offline Hatchet-Jack

  • Full Member
  • ***
  • Posts: 171
Re: Chambers PA Fowler Build
« Reply #13 on: September 27, 2021, 03:30:23 AM »
I like the use of the shears, that's thinking "Outside The Box". Keep'm com'n.

    Tim
Thanks I stole that idea from another builder.

Offline Hatchet-Jack

  • Full Member
  • ***
  • Posts: 171
Re: Chambers PA Fowler Build
« Reply #14 on: September 27, 2021, 03:32:01 AM »
Looking great so far.
A number of nice options are available as Chambers kits.

Jeff
Thank you!
Yes he certainly has some nice kits!

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15755
Re: Chambers PA Fowler Build
« Reply #15 on: September 27, 2021, 03:35:41 AM »
From where do you hail, Hatchet Jack?
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline Hatchet-Jack

  • Full Member
  • ***
  • Posts: 171
Re: Chambers PA Fowler Build
« Reply #16 on: September 27, 2021, 04:24:36 AM »
From where do you hail, Hatchet Jack?
I'm in Northern Kentucky.

Offline Fly Navy

  • Full Member
  • ***
  • Posts: 147
Re: Chambers PA Fowler Build
« Reply #17 on: September 27, 2021, 07:24:25 AM »
I noticed the shears also, good idea and a nice build.

Offline wattlebuster

  • Hero Member
  • *****
  • Posts: 2082
Re: Chambers PA Fowler Build
« Reply #18 on: September 27, 2021, 01:36:33 PM »
I would have never thought bout using shears an there are some on my bench right in reach ???
Nothing beats the feel of a handmade southern iron mounted flintlock on a cold frosty morning

Offline Hatchet-Jack

  • Full Member
  • ***
  • Posts: 171
Re: Chambers PA Fowler Build
« Reply #19 on: September 27, 2021, 03:07:41 PM »
I noticed the shears also, good idea and a nice build.
I stole it so I can't take credit! It works pretty slick.

Offline Hatchet-Jack

  • Full Member
  • ***
  • Posts: 171
Re: Chambers PA Fowler Build
« Reply #20 on: September 27, 2021, 03:08:04 PM »
I noticed the shears also, good idea and a nice build.
Thank you!

Offline Hatchet-Jack

  • Full Member
  • ***
  • Posts: 171
Re: Chambers PA Fowler Build
« Reply #21 on: September 27, 2021, 03:09:11 PM »
I would have never thought bout using shears an there are some on my bench right in reach ???
That's what I thought when I first saw someone doing this. You have to make sure they are fairly sharp, easy enough.

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3702
Re: Chambers PA Fowler Build
« Reply #22 on: September 27, 2021, 03:38:41 PM »
I like your pointed post fixture on your drill press to precisely align the angle on your work to come out at the right place.   :-)   

Offline Hatchet-Jack

  • Full Member
  • ***
  • Posts: 171
Re: Chambers PA Fowler Build
« Reply #23 on: September 27, 2021, 03:50:01 PM »
I like your pointed post fixture on your drill press to precisely align the angle on your work to come out at the right place.   :-)
Thank you. Yes it's nice to have that control. I'm no good at eyeballing it!

Offline thecapgunkid

  • Hero Member
  • *****
  • Posts: 1106
  • Matthew 25:40
Re: Chambers PA Fowler Build
« Reply #24 on: September 28, 2021, 03:13:02 PM »
THANKS for the great Pictures...
NOW FEEL OBLIGED TO POST ON HOW YOU USED THE SCISSORS ON THE RAMROD

You're killin' me Smalls