Flintlock muff or hand warmer pistol

[ntqlvr1948]

 i have this little lady's pistol that I picked up over 15 years ago. It is French...under the  barrel in script says... Croizier A Paris Cour Neuve du Palad. Very finely made and only 5 inches long. Trigger pops out when cocked. I am wondering if there is somebody out there who can make the top jaw and screw without charging an arm and a leg.

[Longknife]

If you want to go cheep you might find compatible parts at TOTW. They might need a little modification,,,,,LK



https://www.trackofthewolf.com/Categories/PartDetail.aspx/722/1/LOCK-LR-1700

[LynnC]

Email  cshirsch@windstream.net at http://www.texasguntrade.com/parts.htm

About castings he makes and sells that may work for your project

[ntqlvr1948]

Thanks, i will check with the man and see what might come close to working. I will send him this picture..The whole gun fits easily in the paln of my hand

[Daryl]

While that one definitely appears to be straight muzzleloading, msome that size were screw barrel pistols
where the barrel unscrewed for loading & shot an oversized, bare ball.

[ntqlvr1948]

No, the barrel is only 1 inch long and unscrews for loading. It is about 40 caliber

[D. Taylor Sapergia]

There is a lug on the bottom of the barrel which engages a key that goes over the barrel, and the barrel can be unscrewed for loading...we're all on the same page!

[Clark Badgett]

Chris Hirsch does have a small French lock kit that the top jaw might fit.