54 cal, 95 grain FF .018 ticking
IMO, that's a very decent deer hunting load...mine is 90grns 3F out of a 33" GM barrel.
All my deer hunting is in fairly thick mixed hardwoods with most shots in the 30-50 yard range...longest shot ever was a buck that stepped out and stopped broadside in an old loggers road at 70 steps...heart shot with a .530" gave complete pass through, he sprinted 25-35 yards and went down in sight.
Wouldn't want to exceed your gun's manufacturer's max load data of course, but usually most .54's are published at least up to 120grns Goex 2F...so you could consider bumping up some more powder if you wanted to.
But to be honest, if you're shooting inside 100 yards with a .54cal, and avoid the big shoulder bones at distance...go low for the heart right behind the elbow, or even a couple inches higher through both lungs, the load you listed should get it done every time with a short drag back to your stand.
You've got a good solid deer rifle and load right there...now...something we all go through depending on where we are in our "hunting curves"...and we'd all like to think we can put them in the 10 ring at 100 yards...but reality is we usually can't and you've got to learn "your max distance" to take a shot while hunting.
By max distance for example, I mean what is the maximum distance at which you can ALWAYS put those balls in a 3" aim point sticker...from hunting positions...at the range...every shot, every time, without fail. Might only be 25 yards...or 40...or 65...but you have to find out. Because under hurried hunting conditions, poor light, little or no rest, adrenalin flowing...most folks best group is at least twice that size...6" or more...find you real max, hunt within those limitations, and you'll have a short drag every time.