« previous next »
Pages: 1 [2]   Go Down

Author Topic: JBMR Original Jag  (Read 1366 times)

Offline Joe R

  • Starting Member
  • *
  • Posts: 43
Re: JBMR Original Jag
« Reply #25 on: April 19, 2025, 04:15:13 AM »




Let me know if you have any questions.

(Note: original image posted on 4-18 was modified 4-20.)
« Last Edit: April 20, 2025, 07:12:16 PM by Joe R »
Logged

Online whetrock

  • Full Member
  • ***
  • Posts: 246
Re: JBMR Original Jag
« Reply #26 on: April 20, 2025, 09:31:19 PM »

I don't own any of these rifles, but I'm glad to have had the chance to learn something. Thanks for posting the photo and measurements. Facinating!
Logged

Offline 44-henry

  • Hero Member
  • *****
  • Posts: 1140
Re: JBMR Original Jag
« Reply #27 on: April 20, 2025, 10:10:22 PM »
I was showing a friend how to use one of our CNC lathes this morning. The drawing posted above was as good as anything to illustrate the process for him. This was the result. Send me your address and I will drop it in the mail for you.


Logged

Offline Daryl

  • Hero Member
  • *****
  • Posts: 16434
Re: JBMR Original Jag
« Reply #28 on: April 20, 2025, 10:42:37 PM »
Good work. The only improvement I would make vis to have the screw either 8x32 or 10x32 and made of steel ( from a machine screw)
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline Woodpecker

  • Starting Member
  • *
  • Posts: 22
Re: JBMR Original Jag
« Reply #29 on: April 20, 2025, 11:27:17 PM »
Joe R, thank you very much for that. I got it out today and during cleaning you can feel when the regular jag goes beyond the barrel grooves and then the taper binds. Had to spin some material to get to the bottom.

44-henry, PM incoming.
Logged
Pages: 1 [2]   Go Up
« previous next »