« previous next »
Pages: 1 [2] 3 4 ... 7   Go Down

Author Topic: Building a Double Barrel Flintlock Shotgun  (Read 74377 times)

Offline Cory Joe Stewart

  • Hero Member
  • *****
  • Posts: 1862
    • My etsy shop
Re: Building a Double Barrel Flintlock Shotgun
« Reply #25 on: February 06, 2016, 04:19:13 AM »
Looking good.  Very fun to watch.
Logged

Offline David R. Pennington

  • Hero Member
  • *****
  • Posts: 2928
Re: Building a Double Barrel Flintlock Shotgun
« Reply #26 on: February 06, 2016, 04:26:35 AM »
What were the barrel lengths and how long are they after sawing? Looking good!
Logged
VITA BREVIS- ARS LONGA

Offline Daniel

  • Sr. Member
  • ****
  • Posts: 472
Re: Building a Double Barrel Flintlock Shotgun
« Reply #27 on: February 06, 2016, 05:15:39 AM »
You are one very talented man. God given talent.
Logged
Daniel     Ecc.4:12

Offline runastav

  • Hero Member
  • *****
  • Posts: 1152
Re: Building a Double Barrel Flintlock Shotgun
« Reply #28 on: February 06, 2016, 06:54:19 PM »
Hi All! and thank you!
thimble rig, the wood is Burred Birchwood hopfully with some live in ;)I cant use walnut, to alergik
David R. barrel l is 29 inches include the breachplugs
So is the standing breack hooks
Runar
















Logged

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: Building a Double Barrel Flintlock Shotgun
« Reply #29 on: February 06, 2016, 08:02:36 PM »
Runastav:  I think you should have cut the rectangular holes about 1/4" further up the plate - closer to the top plate.  The way it is now, you will have a lot of standing breech above the plain of the barrels.
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15837
Re: Building a Double Barrel Flintlock Shotgun
« Reply #30 on: February 06, 2016, 09:11:19 PM »
Appears with the heights as made, the tang will be very thin, if reduced to just barely above the height of the barrels.
I guess we'll see what happens later.
« Last Edit: February 06, 2016, 09:11:45 PM by Daryl »
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline runastav

  • Hero Member
  • *****
  • Posts: 1152
Re: Building a Double Barrel Flintlock Shotgun
« Reply #31 on: February 06, 2016, 09:18:44 PM »
Taylor and Daryl, yes the top is ca 5mm to high and will be maskined away so the next photos will show the result ;)The topstrap is before maskining ca8mm thick.The finished topstrap will be 1/8" ca 3mm and line with barrelribtop.
Runar
Logged

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: Building a Double Barrel Flintlock Shotgun
« Reply #32 on: February 06, 2016, 10:42:40 PM »
Great that you have thought this through Runastav.  I'm enjoying your thread, and looking forward to your next postings.
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

wbradbury

  • Guest
Re: Building a Double Barrel Flintlock Shotgun
« Reply #33 on: February 06, 2016, 10:49:54 PM »
Quote from: D. Taylor Sapergia on February 06, 2016, 10:42:40 PM
Great that you have thought this through Runastav.  I'm enjoying your thread, and looking forward to your next postings.

I find myself checking this thread for new posts quite often now. Great work, Runstav
Logged

Hand

  • Guest
Re: Building a Double Barrel Flintlock Shotgun
« Reply #34 on: February 07, 2016, 01:09:23 AM »
Very exciting new build Runar! Brodern og meg satsa på ein liten tur innom, om ikkje så lenge.
Logged

Offline L. Akers

  • Hero Member
  • *****
  • Posts: 509
Re: Building a Double Barrel Flintlock Shotgun
« Reply #35 on: February 07, 2016, 02:17:38 AM »
Quote from: Daryl on February 06, 2016, 09:11:19 PM
Appears with the heights as made, the tang will be very thin, if reduced to just barely above the height of the barrels.
I guess we'll see what happens later.

The barrels appear to be too low because he does not have the rib extension installed yet. I'll betcha the height will be correct after it's on.
Logged

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master Engraver FEGA.
Re: Building a Double Barrel Flintlock Shotgun
« Reply #36 on: February 07, 2016, 06:43:02 PM »
 If you visualize how the tang will be you can see that eveything is just right. He has this  figured out exactly.
Logged
Nobody is always correct, Not even me.

Boompa

  • Guest
Re: Building a Double Barrel Flintlock Shotgun
« Reply #37 on: February 07, 2016, 07:01:26 PM »
  Is this cool or what!
Logged

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Building a Double Barrel Flintlock Shotgun
« Reply #38 on: February 07, 2016, 08:28:16 PM »
Quote from: L. Akers on February 07, 2016, 02:17:38 AM
Quote from: Daryl on February 06, 2016, 09:11:19 PM
Appears with the heights as made, the tang will be very thin, if reduced to just barely above the height of the barrels.
I guess we'll see what happens later.

The barrels appear to be too low because he does not have the rib extension installed yet. I'll betcha the height will be correct after it's on.
We will just have to wait for the next installment to find out.
David
Logged

Offline runastav

  • Hero Member
  • *****
  • Posts: 1152
Re: Building a Double Barrel Flintlock Shotgun
« Reply #39 on: February 07, 2016, 08:51:59 PM »
Hi all and thank you!
Ok, here is how I do it ;)When bending the tang, I use aluminium in visejaws and tight hard and pound with hewy hammer just over the radius and it works
Runar













Not so bad ?



Logged

Offline tim crowe

  • Full Member
  • ***
  • Posts: 196
Re: Building a Double Barrel Flintlock Shotgun
« Reply #40 on: February 07, 2016, 09:15:10 PM »
Runar,
Nice craftsmanship. I always learn something new from your posts.
Logged

BartSr

  • Guest
Re: Building a Double Barrel Flintlock Shotgun
« Reply #41 on: February 07, 2016, 09:29:28 PM »
I like your idea of using a hole filler when drilling an outline, neat, very good.

BartSr
Logged

Offline Curtis

  • Hero Member
  • *****
  • Posts: 2338
  • Missouri
Re: Building a Double Barrel Flintlock Shotgun
« Reply #42 on: February 07, 2016, 09:35:12 PM »
Quote from: BartSr on February 07, 2016, 09:29:28 PM
I like your idea of using a hole filler when drilling an outline, neat, very good.

BartSr


I noticed that as well, what a simple solution to a problem, never thought of that before!  Definitely will get some use from that trick.

Curtis
Logged
Curtis Allinson
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, late at night when I am alone in the inner sanctum of my workshop and no one else can see, I sand things using only my fingers for backing

Offline FDR

  • Sr. Member
  • ****
  • Posts: 331
Re: Building a Double Barrel Flintlock Shotgun
« Reply #43 on: February 07, 2016, 11:18:17 PM »
Now this guy thinks! What an education in problem solving.
Logged

Online davec2

  • Hero Member
  • *****
  • Posts: 2958
    • The Lucky Bag
Re: Building a Double Barrel Flintlock Shotgun
« Reply #44 on: February 08, 2016, 12:14:48 AM »
Runastav,

You never cease to AMAZE me !!!!!  GREAT work.  Keep going !!!
Logged
"No man will be a sailor who has contrivance enough to get himself into a jail; for being in a ship is being in a jail, with the chance of being drowned... a man in a jail has more room, better food, and commonly better company."
Dr. Samuel Johnson, 1780

Offline SBachner

  • Jr. Member
  • **
  • Posts: 88
Re: Building a Double Barrel Flintlock Shotgun
« Reply #45 on: February 08, 2016, 01:08:20 AM »
Quote from: Curtis on February 07, 2016, 09:35:12 PM
Quote from: BartSr on February 07, 2016, 09:29:28 PM
I like your idea of using a hole filler when drilling an outline, neat, very good.

BartSr


I noticed that as well, what a simple solution to a problem, never thought of that before!  Definitely will get some use from that trick.

Curtis

Does that keep the current hole from "collapsing" into the previous hole?
Logged

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master Engraver FEGA.
Re: Building a Double Barrel Flintlock Shotgun
« Reply #46 on: February 08, 2016, 04:35:20 AM »
You are doing a great job. I just saw my tangs out with a jewelers saw.  Good idea on the drill hole stop.
Logged
Nobody is always correct, Not even me.

BartSr

  • Guest
Re: Building a Double Barrel Flintlock Shotgun
« Reply #47 on: February 08, 2016, 06:48:43 AM »
Quote from: SBachner on February 08, 2016, 01:08:20 AM
Quote from: Curtis on February 07, 2016, 09:35:12 PM
Quote from: BartSr on February 07, 2016, 09:29:28 PM
I like your idea of using a hole filler when drilling an outline, neat, very good.

BartSr


I noticed that as well, what a simple solution to a problem, never thought of that before!  Definitely will get some use from that trick.

Curtis

Does that keep the current hole from "collapsing" into the previous hole?
It would for the way I do it.

BartSr
Logged

Offline Captchee

  • Hero Member
  • *****
  • Posts: 768
Re: Building a Double Barrel Flintlock Shotgun
« Reply #48 on: February 09, 2016, 03:46:03 PM »
 i cut mine out as well . as was said , good idea with the drill. i like the way you keep the drill from walking into the previous hole . Outstanding job so far
Logged

Offline runastav

  • Hero Member
  • *****
  • Posts: 1152
Re: Building a Double Barrel Flintlock Shotgun
« Reply #49 on: February 09, 2016, 08:45:10 PM »
Hi Guys and thank you all so much!
The nice locks is here now, the breach plugs is filed to flats for the locks. The stock job is next :)
Runar













Skraping with a chopped double barrel have some I cut for Cowboy Actions shooting ;)






Logged
Pages: 1 [2] 3 4 ... 7   Go Up
« previous next »