Author Topic: .355 round ball  (Read 1434 times)

Offline Tilefish

  • Full Member
  • ***
  • Posts: 173
.355 round ball
« on: March 31, 2020, 10:39:25 PM »
Was wondering if anyone had a source for .355 round balls. I know I can get a mold and cast my own. But wanted to shoot some vs the .350s before I invested in a mold. Thanks for any help.
Chad

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7629
Re: .355 round ball
« Reply #1 on: March 31, 2020, 11:00:37 PM »
Did you try Track of the Wolf?

Offline Tilefish

  • Full Member
  • ***
  • Posts: 173
Re: .355 round ball
« Reply #2 on: March 31, 2020, 11:30:47 PM »
Yes tried TOW and Dixie. No luck but thank you.
Chad

Offline yulzari

  • Full Member
  • ***
  • Posts: 218
Re: .355 round ball
« Reply #3 on: April 01, 2020, 02:18:02 PM »
Tanner's son carries on his father's mould making business at very reasonable rates. He will make a round ball mould of any desired size and will certainly do you a 0.355" one.   https://www.ballmoulds.com
« Last Edit: April 02, 2020, 01:07:53 PM by yulzari »
Nothing suceeds like a beakless budgie

Offline Daryl

  • Hero Member
  • *****
  • Posts: 14970
Re: .355 round ball
« Reply #4 on: April 01, 2020, 09:39:18 PM »
AFAIK, no commercial mould maker I know of makes that size. I would like one as well, but I make due (quite well, too) with a .350" mould and my normal thick patches.
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline Tilefish

  • Full Member
  • ***
  • Posts: 173
Re: .355 round ball
« Reply #5 on: April 02, 2020, 04:03:04 AM »
AFAIK, no commercial mould maker I know of makes that size. I would like one as well, but I make due (quite well, too) with a .350" mould and my normal thick patches.

Thanks Daryl. If you don't mind me asking what thickness of patching are you using with the .350 ball
Chad

Offline Daryl

  • Hero Member
  • *****
  • Posts: 14970
Re: .355 round ball
« Reply #6 on: April 02, 2020, 09:36:21 AM »
I'm currently using 10oz denim I measure thinner than normal, at .020" compressed in my caliper jaws between f
inger and thumb.(wide part of the jaws)
The previous 10 oz. denim I bought measured .0225".  The balls are small in diameter, so loading is easy.
My muzzle's crown looks like this. I don't need to use the short starter, but it's quicker to do it that way
rather than choking up on the rod to get the ball and patch started.
My .32's muzzle. The .36 looks the same but I haven't taken it's picture yet. The .36 has much wider grooves.



Daryl

"a gun without hammers is like a spaniel without ears" King George V