« previous next »
Pages: [1]   Go Down

Author Topic: Barrel flats filing fixture  (Read 4750 times)

Offline flatsguide

  • Hero Member
  • *****
  • Posts: 852
Barrel flats filing fixture
« on: January 03, 2021, 07:04:26 AM »
IMAFES CANNOG BE RETRIEVED. TTEY ARE ON A DEFUNCT HOSTING PLATFORMThis was posted before but in the wrong place.

Every blue moon I come up with and idea that works. I was not particularly looking forward to striking the barrel flats on my Jim Chambers English sporting rifle. Somehow in the basement of my memory I came up with this idea on draw filing flats. I had this idea stored away and it is not my idea but I thought I would see if it worked on barrel flats. Let me tell you that, as they say in England “ It works a treat”.
I turned two aluminum cones that had straight sections that slipped into the bore. Drilled two countersunk hole in the wood cradle. To slip the cones in. The barrel spins freely so however the file touches the bbl flats the file is always flat to the flats and take the skill and human error out of the equation. I’m using a Bahco 10” mill bastard and drawfile the usual way but I finish up with the file lengthwise (break and smooth both ends of the file) useing thin gloves. The file will bend to the swamped contour and prevent a wavy surface.
Cheers Richard
Today I remade the fixture to be adjustable to accommodate different bbl lengths.






















« Last Edit: August 28, 2024, 09:01:03 PM by rich pierce »
Logged

Offline Rawhide Rick

  • Jr. Member
  • **
  • Posts: 97
Re: Barrel flats filing fixture
« Reply #1 on: January 18, 2021, 05:11:59 AM »
I assume different cones for different calibers?
Logged

Offline flatsguide

  • Hero Member
  • *****
  • Posts: 852
Re: Barrel flats filing fixture
« Reply #2 on: January 19, 2021, 04:55:43 PM »
Yes, just a nice slip fit. I was somewhat surprised how well this setup worked. Apologies for the slow reply.
Richard
Logged

Offline 2 shots

  • Full Member
  • ***
  • Posts: 204
Re: Barrel flats filing fixture
« Reply #3 on: December 06, 2023, 03:38:52 AM »
what is wrong with you  :) that shop is way too neat. ;)
Logged

Offline dadybear1

  • Full Member
  • ***
  • Posts: 158
Re: Barrel flats filing fixture
« Reply #4 on: December 06, 2023, 03:20:10 PM »
WHERE  CAN A PERSON GET THE CONES?   THANK FOR THE INFORMATION--
Logged

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9687
Re: Barrel flats filing fixture
« Reply #5 on: December 10, 2023, 05:42:42 PM »
Quote from: dadybear1 on December 06, 2023, 03:20:10 PM
WHERE  CAN A PERSON GET THE CONES?   THANK FOR THE INFORMATION--

Easy to make IF you have a lathe and aluminum will not damage the breech threads or the muzzle.It's been over 20 years since I draw filed a barrel and I now get tired thinking of doing it again.
Bob Roller
Logged

Offline Jim Kibler

  • Hero Member
  • *****
  • Posts: 4472
    • Personal Website
Re: Barrel flats filing fixture
« Reply #6 on: December 16, 2023, 01:11:21 AM »
Well isn't that slick!
Logged

Offline Beaverman

  • Hero Member
  • *****
  • Posts: 569
Re: Barrel flats filing fixture
« Reply #7 on: December 16, 2023, 01:29:50 AM »
Quote from: Bob Roller on December 10, 2023, 05:42:42 PM
Quote from: dadybear1 on December 06, 2023, 03:20:10 PM
WHERE  CAN A PERSON GET THE CONES?   THANK FOR THE INFORMATION--

Easy to make IF you have a lathe and aluminum will not damage the breech threads or the muzzle.It's been over 20 years since I draw filed a barrel and I now get tired thinking of doing it again.
Bob Roller

You don't need aluminum, you can turn them from wood.
Logged
Pages: [1]   Go Up
« previous next »