« previous next »
Pages: [1] 2   Go Down

Author Topic: Hot off the Bench  (Read 2768 times)

Online David Rase

  • Hero Member
  • *****
  • Posts: 4384
  • If we need it here, make it here. Charlie Daniels
Hot off the Bench
« on: July 29, 2025, 05:43:37 AM »
Rifle specifications; 
The rifle is built around a Rice 38” ‘C’ weight .50 caliber barrel.  The stock is a piece of curly ash I acquired from Randy Cochran around 8 years or so years ago.  The lock is a large Siler built by Walter Cain.  I have had this lock sitting around in my lock drawer for 20 plus years.  The steel furniture is all hand made by myself, as is the hand split rammer.  The double set DST 4 triggers were modified per Gun Builders Companion 2, by Frank House.  The stock is finished using 2 coats of aqua fortis that was made in Montana by my late friend Joe Sharber, and blushed between applications.  I followed this up with an application of Kline's Orange Toner.  Next, I put some True Coat on an applicator, then I dipped the wetted applicator in some lamp black and applied this to the entire stock, waited a few minutes and then rubbed the entire stock down with a lint free towel, leaving the lamp black to collect in the low relief areas.  I rubbed in a second application of True Coat and will probably rub in one or two more coats.  The metal was etched in a 3 to 1 solution of water and Clorox bleach.  I have not used this finish in probably over 20 years but it was appropriate for this project.  After the Clorox treatment the barrel went through 3 rust brown cycles with heavy carding after each cycle.   The rifle weighs 8 lbs. 5 oz.  The length of pull is 13 3/8”.





























Logged

Offline whetrock

  • Global Moderator
  • Hero Member
  • *
  • Posts: 722
Re: Hot off the Bench
« Reply #1 on: July 29, 2025, 06:26:08 AM »
Quote from: David Rase on July 29, 2025, 05:43:37 AM
The metal was etched in a 3 to 1 solution of water and Clorox bleach.  I have not used this finish in probably over 20 years but it was appropriate for this project. 

I think Hershel would be pleased. Very nice, Dave.
Logged

Offline bama

  • Hero Member
  • *****
  • Posts: 2278
    • Calvary Longrifles
Re: Hot off the Bench
« Reply #2 on: July 29, 2025, 06:43:59 AM »
That’s a pretty “racy” looking rifle that you have built  ;D
Logged
Jim Parker

"An Honest Man is worth his weight in Gold"

Offline rennikselum

  • Full Member
  • ***
  • Posts: 102
  • Jeff Rogers
Re: Hot off the Bench
« Reply #3 on: July 29, 2025, 01:19:41 PM »
Fantastic! Great work as always!
Thanks for the detailed information on the finish.
Logged

Online wattlebuster

  • Hero Member
  • *****
  • Posts: 2147
Re: Hot off the Bench
« Reply #4 on: July 29, 2025, 01:46:01 PM »
Wow. I like that. Alot
Logged
Nothing beats the feel of a handmade southern iron mounted flintlock on a cold frosty morning

Online AMartin

  • Hero Member
  • *****
  • Posts: 877
Re: Hot off the Bench
« Reply #5 on: July 29, 2025, 01:53:33 PM »
You are a fine gunmaker ... See you in a week !!!
Logged

Online BOB HILL

  • Hero Member
  • *****
  • Posts: 2325
Re: Hot off the Bench
« Reply #6 on: July 29, 2025, 02:37:31 PM »
I love everything about it, David. That is a fantastic rifle. Thanks for sharing it with us.
Bob
Logged
South Carolina Lowcountry

Offline Stoner creek

  • Hero Member
  • *****
  • Posts: 3093
Re: Hot off the Bench
« Reply #7 on: July 29, 2025, 04:13:18 PM »
And I can assume that this one will be staying in Kentucky where it belongs?
Logged
Stop Marxism in America

Offline Austin

  • Hero Member
  • *****
  • Posts: 555
  • Austin Paul
Re: Hot off the Bench
« Reply #8 on: July 29, 2025, 04:55:07 PM »
Very nice!
Logged
Eat Beef

Offline P.Bigham

  • Hero Member
  • *****
  • Posts: 622
Re: Hot off the Bench
« Reply #9 on: July 29, 2025, 05:12:25 PM »
Classy.
Logged
" not all who wander are lost"

Offline oldtravler61

  • Hero Member
  • *****
  • Posts: 4558
  • We all make mistakes.
Re: Hot off the Bench
« Reply #10 on: July 29, 2025, 06:50:39 PM »
   Wow David.....!!!!!!!
Logged

Offline ScottH

  • Hero Member
  • *****
  • Posts: 620
Re: Hot off the Bench
« Reply #11 on: July 29, 2025, 08:56:11 PM »
Definitely Nifty!
Logged

Offline mesabi

  • Starting Member
  • *
  • Posts: 46
Re: Hot off the Bench
« Reply #12 on: July 29, 2025, 09:24:55 PM »
Beautiful!  I love the barrel tang carving/molding:  Simple, precise, and elegant.  This is one of those forum guns I'll be coming back to look at again and again.
Logged

Offline TommyG

  • Hero Member
  • *****
  • Posts: 632
  • "Double Trouble"
Re: Hot off the Bench
« Reply #13 on: July 30, 2025, 02:39:02 AM »
Very cool gun.  Love the metal finish.
Logged

Offline Stoner creek

  • Hero Member
  • *****
  • Posts: 3093
Re: Hot off the Bench
« Reply #14 on: July 30, 2025, 02:50:27 AM »
That gun will get to be a part of the Sunday 5/12 match after CLA.
Logged
Stop Marxism in America

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 8323
Re: Hot off the Bench
« Reply #15 on: July 30, 2025, 04:03:33 AM »
A lot to like there😀
Logged

Offline Carl Young

  • Hero Member
  • *****
  • Posts: 664
Re: Hot off the Bench
« Reply #16 on: July 30, 2025, 06:24:30 AM »
You're going to look very cool carrying this rifle while surfing the tidal-wave to Stoner Creek  8)
Godspeed,
Carl








Logged
Already long ago, from when we sold our vote to no man, the People have abdicated our duties; for the People who once upon a time handed out military command, high civil office, legions — everything, now restrains itself and anxiously hopes for just two things: bread and circuses. -Juvenal

Offline Tony N

  • Hero Member
  • *****
  • Posts: 712
Re: Hot off the Bench
« Reply #17 on: July 30, 2025, 02:59:44 PM »
Great looking rifle! Love the finish

Tony
Logged
Always remember 12/7/41, 9/11/01, 1/6/21

Offline gusd

  • Sr. Member
  • ****
  • Posts: 315
Re: Hot off the Bench
« Reply #18 on: July 30, 2025, 09:37:20 PM »
Love everything about it!
Gus
Logged

Offline Daryl

  • Hero Member
  • *****
  • Posts: 16875
Re: Hot off the Bench
« Reply #19 on: July 31, 2025, 12:49:19 AM »
A little emery or wet/dry and some wrist twisting and the muzzle would be perfect too, Dave. Wayne?
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline Stoner creek

  • Hero Member
  • *****
  • Posts: 3093
Re: Hot off the Bench
« Reply #20 on: July 31, 2025, 01:39:55 AM »
I would advise Mr Rase to plan on leaving this piece at Stoner Creek or I cannot insure his safe passage out of our commonwealth. Just good advice, nothing else 🤷‍♂️.
Logged
Stop Marxism in America

Offline Shreckmeister

  • Hero Member
  • *****
  • Posts: 3842
  • GGGG Grandpa Schrecengost Gunsmith/Miller
Re: Hot off the Bench
« Reply #21 on: July 31, 2025, 02:24:05 AM »
She’s a knockout!
Logged
Rightful liberty is unobstructed action according to our will within limits drawn around us by the equal rights of others. I do not add 'within the limits of the law' because law is often but the tyrant's will, and always so when it violates the rights of the individual.

Offline Curtis

  • Hero Member
  • *****
  • Posts: 2396
  • Missouri
Re: Hot off the Bench
« Reply #22 on: August 01, 2025, 08:42:02 AM »
She's a hottie alright!  8) The color combination, metal finish and the carving all work well together.  Really nice work, Dave!  Thanks for posting it.

Curtis
Logged
Curtis Allinson
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, late at night when I am alone in the inner sanctum of my workshop and no one else can see, I sand things using only my fingers for backing

Offline mountainman

  • Hero Member
  • *****
  • Posts: 518
  • Laurel Highlands
Re: Hot off the Bench
« Reply #23 on: August 01, 2025, 02:59:46 PM »
That's some NICE work Sir!!! Beautiful!!
Logged

Offline coopersdad

  • Full Member
  • ***
  • Posts: 176
Re: Hot off the Bench
« Reply #24 on: August 02, 2025, 12:09:46 AM »
I also like it all, especially the wood finish, wonderful color and warmth.  What is True Coat?  My searches have come up empty, likely my weak computer-fu. 
Never mind, guess it's Wahkon Bay TruCoat. 
« Last Edit: August 06, 2025, 03:32:38 AM by coopersdad »
Logged
Mike Westcott
Pages: [1] 2   Go Up
« previous next »