Author Topic: Let's see your squirrel rifle!!! (Read 381068 times)

Dennis Glazener · « **Reply #725 on:** June 07, 2019, 02:29:03 AM »

Looks a lot like a Kibler kit. Nice job.
Dennis

Quote from: Flycaster1977 on June 06, 2019, 02:25:53 PM

My first “build”. .36 smr

Flycaster1977 · « **Reply #726 on:** June 07, 2019, 06:38:48 AM »

Dennis,
It is jims smr kit. I added a horn toe plate and muzzle cap. I figured it would be a great place to start for a first build. I enjoyed it and i learned a lot.

Ben

Dennis Glazener · « **Reply #727 on:** June 07, 2019, 05:22:35 PM »

The nose cap for that rifle is a challenge due to the size of the wood you have to work with. I have made several and hated to start on each one of them.
Dennis

Ridge · « **Reply #728 on:** June 30, 2019, 07:40:51 PM »

This is my squirrel rifle. It's a 25 caliber made by Dave Motto.

codger · « **Reply #729 on:** July 04, 2019, 07:08:55 PM »

Finished this last summer....36 cal. 42" bbl. Chambers late Kentland lock, walnut stock.

hanshi · « **Reply #730 on:** July 04, 2019, 10:08:02 PM »

What great eye candy!

Einsiedler · « **Reply #731 on:** July 05, 2019, 04:06:26 PM »

Here is my very amateurish attempt at a rifle built from some old parts I found when moving into my new shop. It is pretty simple and utilitarian. Not the best workmanship but it shoots. Barrel is an old
Douglas. 15/16 A F. .40 cal. Davis Jäger lock. Horn and pouch are also my own creation. Not a copy of anything in particular. Just wanted something kind of "Jägerische". Pleasant to carry in the woods. Definitely not a "long" rifle.

Love looking at all the fine rifles posted here. Thank you!!!

Neven · « **Reply #732 on:** July 05, 2019, 05:53:52 PM »

More squirrels with the McCoy .32

Neven · « **Reply #733 on:** July 06, 2019, 07:07:44 AM »

One more

Kopfjaeger · « **Reply #734 on:** July 24, 2019, 02:06:42 PM »

A lot of nice squirrel rifles.

hanshi · « **Reply #735 on:** July 24, 2019, 11:06:57 PM »

Maybe posted previously, can't remember, but here it is anyway. .36 X 3/4" X 38"; a super lightweight.

stikshooter · « **Reply #736 on:** July 24, 2019, 11:29:36 PM »

Hope it"s light otherwise that squirrel could kill Godzilla

Viktor · « **Reply #737 on:** July 25, 2019, 03:21:08 AM »

Great pics! This thread, and the "plan n perdy" are my two favorites, so many beautiful rifles. I have a .40 in the works, I will have to be patient for something to show.

hanshi · « **Reply #738 on:** July 25, 2019, 10:57:40 PM »

Quote from: stikshooter on July 24, 2019, 11:29:36 PM

Hope it"s light otherwise that squirrel could kill Godzilla

Ha, ha! Yes it is a tiny rifle and that squirrel is only standard size.

alacran · « **Reply #739 on:** July 27, 2019, 02:21:48 PM »

Here is a squirrel for you Hanshi

hanshi · « **Reply #740 on:** July 28, 2019, 01:43:43 AM »

Quote from: alacran on July 27, 2019, 02:21:48 PM

Here is a squirrel for you Hanshi

Squirrelasaurus Rex. But not that tough, apparently, since he died from a foot wound.

alacran · « **Reply #741 on:** July 28, 2019, 03:49:00 PM »

The Abert squirrels brain is in their right front paw.

hanshi · « **Reply #742 on:** July 28, 2019, 11:17:46 PM »

Aaaahh....Ha! I see. $:-\$

Mike from OK · « **Reply #743 on:** July 29, 2019, 05:44:32 AM »

Quote from: alacran on July 28, 2019, 03:49:00 PM

The Abert squirrels brain is in their right front paw.

Some would say that you missed... I say you didn't waste meat. ;-)

Mike

alacran · « **Reply #744 on:** July 29, 2019, 04:00:29 PM »

Actually I intentionally went out with the smoothbore that day so I could take a photo of an Abert squirrel that still had its head attached.

Bassdog1 · « **Reply #745 on:** November 28, 2019, 06:25:34 PM »

Lower end of spectrum but I am proud to own it and it is a squirrel getter. No squirrels today but will post some action shots of it this week.

galudwig · « **Reply #746 on:** November 28, 2019, 07:28:56 PM »

Quote from: Bassdog1 on November 28, 2019, 06:25:34 PM

Lower end of spectrum but I am proud to own it and it is a squirrel getter. No squirrels today but will post some action shots of it this week.

Cherokee's were nice little rifles (kind of a Renegade version of a Seneca). I had one for a while and killed quite a few squirrels with it too. Wish I still had it. Mine was an early one, like yours, before they went to single triggers. Thanks for sharing!

Bassdog1 · « **Reply #747 on:** November 29, 2019, 12:20:16 AM »

Yep and an easy little gun to carry around all day if I ever have a flint gun built I am going to have it built to the same dimensions. I have three of these in .32 all in excellent condition one that has never been fired with a beautiful pristine barrel, stock and lock. The other two I alternate between when target shooting and hunting. I recently purchased a factory 32 Seneca and when I get it sighted in and a load developed I am going to sell the unfired gun and a couple others to help fund my first flintlock. Also have a factory 36 barrel and a 32 being re-bored to 40 by Bobby Hoyt and a couple 45 barrels for the Cherokee .

MuskratMike · « **Reply #748 on:** November 29, 2019, 12:48:54 AM »

From the Silvies River Shoot. .40 caliber SMR built by Jim Kibler. Correct horn by Scott Morrison. Anyone can have a great shooting rifle. Anyone can have a great looking rifle. Anyone can have fine accessories, but when they all come together it is something special.
Click on photo to enlarge.

The "Muskrat" wishes everyone a happy, and safe Thanksgiving. May God bless each and everyone of us.

Joe S · « **Reply #749 on:** November 29, 2019, 02:31:53 AM »

Thanks for the photo alacran. It brought back lots of good memories.

I've hunted most everything the west has to offer, but I have to say Abert's Squirrel is my favorite. Haven’t hunted them for 25 years, but hopefully next fall...

News:

Author Topic: Let's see your squirrel rifle!!! (Read 381068 times)

Flycaster1977

Ridge

codger

galudwig

Joe S